How to Wash Your UTV : The Complete Guide

how-to-wash-your-utv

When you take your UTV out into the backwoods, it gets dirty fast. While that’s part of their intended purpose as they transport you over muddy, wet territory, at some point it becomes necessary to remove the dirt and grime if only to prevent build-up from damaging delicate engine components and electronics. You also might want your vehicle to be neat and clean in front of a track race or you may just not always want to sit on a vehicle coated in mud. So you’ll need to wash your UTV. We created the following beginner’s guide on how to wash your UTV step by step below.

How to Wash Your UTV? – Follow This Simple Process

Step 1: Find a place

Start by ensuring you have enough space to do the job right. In the winter, you may be tempted to do it in the garage, and with enough space, this can work. However, garages can sometimes not provide you with the elbow room you need, so think about waiting for a dry, relatively warm day so you can do it in your yard or driveway. If you do this in your yard, ensure you’re careful about introducing new grass, dirt, and weeds to your side by side.

Step 2: Arrange All the Supplies

Next, you have to arrange all the supplies. As tough as your UTV might be, you need to use a product that’s strong enough to get the grime off without damaging the finishing. There are UTV washing kits you can buy, but detergent made for dirt bikes is also just as effective. Also consider getting a pressure washer, scraper, and soft rags to get the job done.

Step 3: Prepare for Washing

There are a few things you need to do before you get your UTV wet. First, you should seal off the air intake and plug up the exhaust so no water can leak inside. You should also ensure any electrical components and fuel systems from water as well. These steps are critical because they will save you from more hard work later when you’ll be attempting to fix the damage that could’ve been avoided.

Step 4: Scrape off Mud & Degrease

The first step in the washing process is to scrape off the layers of mud and grime that have built up on your UTV. You should use a heavy-duty plastic scraper to help get into the nooks and crannies without scratching the plastic. Another useful technique is applying a degreasing solution mixed with water in a pump sprayer, which will help remove any oil or grease that’s built upon the metal parts of your vehicle as well as the engine. If you use a degreasing solution, you’ll need to avoid getting it on the plastics.

Step 5: Wash

Now we’re ready to clear the bulk of the mud from our UTV. Apply thoroughly whatever detergent you’ve chosen to use. If you’re using a pressure washer, it may be a good idea to use a foam gun or foam cannon attachment to ensure a nice even spray. If you’ve decided to prepare your own DIY detergent, be careful that it’s not corrosive to any of the vital parts of the machine. Once applied thoroughly, let it soak deep into the mud for 3 to 5 minutes. It’s tempting to wash the mud off right away, but a little bit of waiting will make the whole procedure much smoother.

Step 6: Rinse

You can choose from two ways to rinse your side by side. One is to use your ordinary hose and nozzle. It works but doesn’t work great against the gunk that is caked-on. Another one is a pressure washer. It delivers a steady stream of high pressure, which helps remove even the most obstinate of grime. Choose between a gas or electric pressure washer. If you hesitate on purchasing your own, look into renting options. Whichever strategy you go with, try to remove as much of the top layer of grime as you can.

Step 7: Scrub

When you rinse your UTV, you are ready to scrub the gunk away. You can use a wash glove or a sponge. For your soap, you can use a bike soap or an automotive detergent. Scrub every surface of your side by side. You can also use a stiff brush to get at those nooks and crannies. If you encounter an extra oily area, spray on some degreaser. After you wait a bit, you can rinse it and the oil off.

Step 8: Dry

You can either let your UTV dry in the sun if the weather is nice, or you can get some lint-free towels and chamois to wipe it down completely. An air compressor can quickly blast away water, which can be a good idea to prevent water from getting into the engine and exhaust and causing rust.

Step 9: Polish & Shine 

Last but not least, your UTV will be looking mighty fine if you finish the washing process by polishing it up. Polishing your UTV side-by-side is just like waxing your car after a good wash. You’ll apply a finishing wax that is particularly designed for utility vehicles and before you know it, your UTV will be looking brand spanking new.

Before going to wash your UTV – Also check this video guide

 

Final Word –

That’s how to wash your UTV easily. At the end of the day, a cleaner machine is going to last longer, so you eventually have to get the grime off. That means you’re going to wash it. You’ll need to regularly wash your UTV to avoid grime corroding its surface. Plus, washing it often helps it maintain an enviable appearance able to turn heads. By following these steps you can easily wash your UTV.

 

Best UTV Seed Spreader -Buyer’s Guide And Expert Review 2024

best-utv-spreader

Spreading seed all over the ground surface of a farm or garden is more comfortable through the use of the best UTV spreader. Using this device makes work easier for anyone by saving time and energy. The use of spreader on UTV allows any farmer or garners to achieve much in little space of time.

It helps to cover large areas which make it a perfect choice to opt for compared to walking through the field, thereby spreading the seed or any powder material with your hands. All that is required is to attach to your UTV and ride as the spreader releases the seed into the ground surface.

UTV seed spreader buyer’s guide

Here are essential things you need to know about getting a seed prayer for your UTV.

Operation

You need to know the kind of seed you want to spread as that will help you to make the right choice with choosing the spreader you need. Seeds vary in sizes and the same with fertilizer. Therefore, you need to understand this as it will affect the flow rate of the spreader whenever it is in operation.

Width of the spreader

One of the factors that you as well need to consider is the width of the spreader device. The width determines the operation of the spreader. If you will be working on a large area and you do not have much time to waste spreading seed or fertilizer, you need to opt for a wide spreader width.

It will be a waste of resources if you get a small width of the spreader and you have large areas of ground to cover. Getting the right width for the spreader is the right thing for you to do.

Convenient installation

When it comes to getting a spreader, you need to look out for the installation. The installation of the spreader should be easier to do for you.  You need to check the design of the spreader and ensure you can easily attach to the UTV you have.

The capacity of the spreader

Every spreader has its capacity written on it, so you need to look into this before buying the next spreader. Getting a perfect spreader will make work easier for you. If you have a large area to work on, it is essential that you opt for the spreader within 50lbs to 350lbs.

Weight

You need to consider the weight of the spreader and ensure your UTV can withstand the weight. Check the weight of the spreader before and after it is loaded with seed or fertilizer and ensure your UTV can conveniently handle it.

Price

The price of UTV spreader ranges from cheap to expensive. You need to choose the one that meets your budget, but you should never overlook getting a quality product. Getting quality products is the best thing that needs to be done as it lasts longer than getting less quality spreader. Also, one of the things that affect the price of a spreader is the brand, and it is advisable to opt for a product from one of the frontiers in the industry.

 

Our Top Best UTV Seed Spreader

1. Buyers Products ATVS100 ATV All-Purpose Broadcast Spreader

You’ve got all your seed spreading need taken care of with the use of the Buyers Products ATVS100 ATV All-Purpose Broadcast Spreader. It is a durable and sturdy spreader that can be attached to your UTV for all seed spreading task.

The plastic hopper has ample space to accommodate over 100 pounds seed. It is straightforward to assemble with the use of the U-bolts that comes with the hopper to get a secure mount on your UTV. The design integrates rain cover on the hopper to keep the seed safe from moisture.

It works excellently and can be considered for both small and large seed spreading job. The only setback with the seed spreader is that it splashes seed all over the UTV and even on the rider which could have been avoided with the use of internal agitator or shield.

Pros

  • Safe to assembly
  • Include rain cover to prevent the seed from water
  • Distributes seed effortlessly

Cons

  • Splashes seed back on UTV
Buyers Products ATVS100 ATV All-Purpose Broadcast Spreader 100 lbs. Capacity with Rain Cover , Green
176 Reviews
Buyers Products ATVS100 ATV All-Purpose Broadcast Spreader 100 lbs. Capacity with Rain Cover , Green
  • Durable, rustproof poly hopper has 100 lb capacity.
  • Ideal for farming, hunting, landscaping, or grounds maintenance.
  • 12V motor is mounted inside the hopper to stay protected while in use.
  • Distributes free flowing materials such as seed, feed, and fertilizer.
  • Included rain cover protects materials from the elements.

 

2. Buyers Products ATVS15A ATV All Purpose Broadcast Spreader

This is a multipurpose spreader that can be used for all kind of seed spreading task all season. It has vertical mount design which you have to mount vertically on your UTV and as well as a quick detached mounting bracket.

It is practically easy to install, and its operation is straightforward with the on and off button as well with adjustable shut off the gate to help you control the amount of seed flow. The hopper comes with dust resistance features and the capacity to accommodate over 15 gallons.

Pros

  • Dustproof resistant
  • Easy to use with regulation system
  • Cover for seed protection

Cons

  • Might require hitch assemble to use on UTV
Buyers Products ATVS15A ATV All Purpose Broadcast Spreader 15 Gallon Capacity Black
114 Reviews
Buyers Products ATVS15A ATV All Purpose Broadcast Spreader 15 Gallon Capacity Black
  • Multipurpose spreader distributes ice melt and bagged #1 rock salt for winter use and fertilizer, seed, and feed for all season use
  • Durable, rust-proof black poly hopper has a capacity of 15 gallons and includes a lid to protect material from the elements
  • More Than Just Parts: From snow and ice equipment to toolboxes, hydraulics, towing, truck and trailer hardware to our innovative lighting products—it’s amazing what Buyers Products can do for your truck
  • We Do Things The Right Way: We design products like we we’re building them for ourselves, because we are; Our teams are staffed with engineers and experts who know how to make a product exceptional
  • Durable and Dependable: Founded in 1946, Buyers Products has become a leader in the truck equipment industry though our commitment to customer care, innovation, and value across our range of products

3. Swisher 19920 Commercial Pro ATV Spreader

The Swisher 19920 Commercial Pro ATV Spreader is a suitable pattern spreader with a flexible adjustable option for your entire seed spreading task. It can be used to spread all kind of seed of different texture. It has a quick fix system as you have to mount on the rear rack of your UTV.

It is a heavy duty spreader, which is why it has to be fastened firmly on the UTV. It has the adjustable option for you to determine the flow of the seed you are spreading. The hopper is UV resistant, and it has a covering to keep the seed secured.

Pros

  • Secured hopper to prevent exposure to moisture
  • Very easy to use
  • Durable and sturdy
  • Adjustable seed flow rate

Cons

  • Not a perfect seed spreader for large area
Swisher 19920 Commercial Pro ATV Spreader, Opaque
25 Reviews
Swisher 19920 Commercial Pro ATV Spreader, Opaque
  • Spread grass seed, fertilizer, salt, or sand consistently
  • Adjustable spread width 4' To 16' Diameter
  • Adjustable Feed gate
  • Frame mounted on and off switch
  • 15 gallon Poly tank; 150 lb capacity

 

4. Field Tuff AS-12V 80Lb ATV/UTV Broadcast Spreader

The Field Tuff AS-12V 12-Volt ATV Broadcast Spreader can easily be mounted on the front or rear rack of your UTV. It is easy to install, and the hopper can accommodate 80 pounds seed of all kind.  It has adjustment lever with a gauge wiring that let you control the flow of the grain and also switch on and off.

The spreader can be used for about 12 feet field which is somewhat considerable for large seed spreading work. It spreads seed 360 degrees as you move around them, controlling the flow from the handlebar.

Pros

  • Durable and sturdy
  • Safe to use and reliable for small and large seed spreading job
  • Rain cover for seed protection

Cons

  • No wiring instruction included and can be quite challenging to get through its installation
Field Tuff AS-80ATV12 Receiver Mount Spreader, 80-Pound
114 Reviews
Field Tuff AS-80ATV12 Receiver Mount Spreader, 80-Pound
  • Easily spread seed and fertilizer with Field Tuff’s 12-Volt ATV Hitch-Mount Spreader; the powerful, 12 Volt DC motor, has a rated speed of 570rpm for a efficient and reliable product and is sealed for protection
  • Heavy-duty and durable, this spreader has a maximum capacity of 80 lbs. and hold up to 8 gallons of grass seed, fertilizer, or small grain
  • The 12’ broadcast width ensures that you will get the job done efficiently! Conveniently, the controls can be reached from the operator’s seat
  • The spreader easily mounts to an ATV, UTV, or utility tractor’s 1 ¼” or 2” receiver; the included wiring harness and on/off switch add to the quality of this spreader
  • Comes with a rain cover to make your product last even longer; 1 year limited Manufacturer’s warranty

Conclusion

Choosing the Best UTV Seed Spreader is the first step to fulfilling your entire seed spreading job. Either for personal or commercial seed spreading work, you need a quality machine to lighten your task and make your work easier.

 

 

Best UTV Windshield – Buyer’s Guide and Expert Review 2024

UTV Windshield

Every UTV rider should know the importance of attaching a windshield to their UTVs. Its appearance on a UTV goes beyond enhancing visibility as it helps to prevent the driver from having direct contact with any flying objects in the air which iterate the need for the best UTV Windshield.

.

Most UTV doesn’t come with a windshield, which shows the need for every owner to get one if truly they know the importance of having it on their UTV. It is undoubtedly one of the UTV accessories that you need to have a pleasant experience with your UTV, especially during frost conditions.

UTV Windshield Buyer’s Guide

It can be quite challenging for you to make the right call with UTV windshield with significant numbers of different products out there in the market. However, we have made the task more comfortable for you with this guide to help you make the right decision.

Here is a list of the things you should consider when buying a UTV windshield

  • Materials
  • Strength
  • Scratch resistance
  • Clarity
  • Cost

Material

You need to know the types of materials that been used in the production of the windshield, and they include polycarbonate, Acrylic, and glass. Choosing the right material among the three has to do with you understanding the advantages and the disadvantages of each of the materials.

The truth about the three materials is that polycarbonate is not mostly used in the UTV industry compared to Acrylic and glass, which are prominent materials for the production of UTV windshield.

Strength

The next factor you should consider is the windshield strength. You must be concerned about this as it determines if the windshield can truly serve its purpose of acquiring it. The three materials are durable and reliable, but one is the strongest, which is the polycarbonate.

It appears that polycarbonate is 250 times stronger than glass and 25 times stronger than Acrylic while Acrylic is ten times stronger than glass. So as it stands, it is clear that polycarbonate can withstand the substantial impact of an object over the other materials.

Scratch resistance

Strength is significant when it comes to choosing your windshield, but you should lever overlook the part of hardness. Hardness is different from strength, and when you hear about scratch resistant, it merely means the hardness of the material.

Surprisingly, the glass material is the hardest. It is the most scratch resistant of the three windshield materials. Acrylic and polycarbonate are as well scratch resistance, but the effect is nowhere near the effectiveness of a glass material.

Clarity

One of the goals of having a windshield is to be able to see clearly while driving during frost and some unbearable condition. Therefore, you should consider Acrylic over the rest of the windshield materials as it has a more significant clarity percentage. Although glass and polycarbonate can allow you to see the thing clearly, but they are both second to Acrylic.

Price

On a final note as regarding the factors to consider with purchasing UTV windshield, the cost should never be overlooked. It determines what you will get in the market. Some are expensive, and some are less expensive. Mind you, quality products don’t come cheap, and you must be ready to spend if you want a quality windshield that will last longer.

 

Top UTV Windshields

Here is our top UTV Windshields.

1. Clearly Tough Polaris RZR 1000 Folding Windshield

Versatility and durability are the core value of this scratch-resistant windscreen. It is made from polycarbonate materials that can beat off VU rays. If you are getting this, you should be aware it is 3/16″ in size and of course, it last longer.

The dynamism behind the creation of the windscreen ensures you can fold to half just in case you need fresh air while driving. Also, it doesn’t take donkey years to mount it on your UTV. Its mounting is stress-free and easy to do.

Polaris RZR 1000 Folding Windshield by Clearly Tough. -SCRATCH RESISTANT- For 2014-2018 models and 2019-2020 RZR S models. Also fits RZR 900 (2015-2020 Models) - True Half windshield when folded.
52 Reviews
Polaris RZR 1000 Folding Windshield by Clearly Tough. -SCRATCH RESISTANT- For 2014-2018 models and 2019-2020 RZR S models. Also fits RZR 900 (2015-2020 Models) - True Half windshield when folded.
  • SCRATCH-RESISTANT HARD COAT: The Polaris RZR 1000 (2014-2018) Folding Windshield is only 3/16" of high impact (250x Stronger than Glass), premium polycarbonate with a scratch-resistant hard coat. Many other windshields aren't hard coated and don't last as long as a product from Clearly Tough. Made in America, the windshields are long-lasting and mar-resistant, meaning they look good for longer!
  • TRUE 2-in-1 WINDSHIELD: When folded it is a legitimate Half windshield. The bend in the windshield adds rigidity and diverts air around you when in the Half position. Our Full Folding windshields give you the best of both worlds. They provide protection from wind and rain in the Full position, plus you have the option to fold the windshield down to a Half windshield easily. It's like getting 2 windshields in 1! And there's no bulky hardware blocking visibility so you won't miss a thing.
  • EASY TO INSTALL: The Clearly Tough RZR 1000 Full Folding windshield is precision crafted to fit the body with minimal gaps while the bottom trim molding protects the body. You can install The Clearly Tough RZR 1000 Full Folding windshield in minutes just using our heavy-duty velcro straps. Our patent-pending design allows you to adjust the fit around mirrors and other accessories.
  • VERSATILE FOR THE BEST RIDE EVERY TIME: Our SxS windshields offer maximum versatility. Simply adjust the velcro straps for the perfect fit. Switch between a Full or Half windshield in minutes. You can even move the windshield up the roll bar for a taller Half windshield. Or pull it off and go NAKED!
  • 5-YEAR MATERIAL WARRANTY: Clearly Tough's high quality polycarbonate is guaranteed against cracking, crazing, or yellowing. Other materials may have these issues, but our high-quality polycarbonate won't. We know you’ll love your windshield, but you'll rest easier knowing that you've bought the best quality polycarbonate available.

Pros

  • Scratch-resistant coating
  • protect you from rain and wind
  • No tools for installation
  • Mount easily on the Car
  • Foldable for easy storage

Cons

  • It has no significant setback

 

 

2. Clearly Tough Polaris RZR 570/800 + 900

With this Tough Polaris RZR 570/800 + 900 windscreen, you are getting yourself a long-lasting windshield that can offer maximum protection to you from wind and other unseen substances in the air.

It gives no issue with visibility as it is clear. The scratch-resistant material makes it worthwhile, and the fact it can beat off rays from the sun makes it overwhelming. The windshield is easy to install without the use of any tools. It comes with a foldable option, which means you can adjust with the Velcro straps.

Polaris RZR 570 / 800 + 900 (2014 & earlier) Full Folding Windshield by Clearly Tough (Width = 40') - SCRATCH RESISTANT - True Full to Half windshield. Easy on / Easy off. Free Shipping. Made in USA!
62 Reviews
Polaris RZR 570 / 800 + 900 (2014 & earlier) Full Folding Windshield by Clearly Tough (Width = 40") - SCRATCH RESISTANT - True Full to Half windshield. Easy on / Easy off. Free Shipping. Made in USA!
  • SCRATCH-RESISTANT HARD COAT: The Polaris RZR 570, 800 and 900 (2014 and Earlier) Folding Windshield is only 3/16" of high impact (250x Stronger than Glass), premium polycarbonate with a scratch-resistant hard coat. Many other windshields aren't hard coated and don't last as long as a product from Clearly Tough. Made in America, the windshields are long-lasting and mar-resistant, meaning they look good for longer!
  • TRUE 2-in-1 WINDSHIELD: When folded it is a legitimate Half windshield. The bend in the windshield adds rigidity and diverts air around you when in the Half position. Our Full Folding windshields give you the best of both worlds. They provide protection from wind and rain in the Full position, plus you have the option to fold the windshield down to a Half windshield easily. It's like getting 2 windshields in 1! And there's no bulky hardware blocking visibility so you won't miss a thing.
  • EASY TO INSTALL: The Clearly Tough RZR Full Folding windshield is precision crafted to fit the body with minimal gaps while the bottom trim molding protects the body. You can install The Polaris RZR Full Folding windshield in minutes just using our heavy-duty velcro straps. Our patent-pending design allows you to adjust the fit around mirrors and other accessories.
  • VERSATILE FOR THE BEST RIDE EVERY TIME: Our SxS windshields offer maximum versatility. Simply adjust the velcro straps for the perfect fit. Switch between a Full or Half windshield in minutes. You can even move the windshield up the roll bar for a taller Half windshield. Or pull it off and go NAKED!
  • 5-YEAR MATERIAL WARRANTY: Clearly Tough's high quality polycarbonate is guaranteed against cracking, crazing, or yellowing. Other materials may have these issues, but our high-quality polycarbonate won't. We know you’ll love your windshield, but you'll rest easier knowing that you've bought the best quality polycarbonate available.

Pros

  • Easy to install with its instruction
  • Foldable windshield
  • Abrasion resistant
  • Versatile and durable
  • Protect against sun, rain and wind
  • Requires no tools for installation

Cons

· Takes a whole lot of time to fold, and you have to be extra careful to avoid cracks

 

3. Full-Size POLARIS RANGER 570/900/1000 and the Polaris Brutus

What if I tell you this windshield is made with the same materials used in Airplane and Nascar, will you still buy it? I doubt you can overlook it, considering how reliable and rest assured it is. The windshield is durable and can withstand any condition.

You can easily fold the windshield, adjusts and fit into your UTV without any hassles. The installation of the windscreen is straightforward, as all you need is to follow the instruction given. The windshield is viable with keeping you safe from wind and other flying materials in the air to those that can’t be seen with naked eyes.

Compatible with Polaris Ranger 570/900/1000 and Brutus Full Tilting Windshield (Proform roll bar only) - Made in USA
78 Reviews
Compatible with Polaris Ranger 570/900/1000 and Brutus Full Tilting Windshield (Proform roll bar only) - Made in USA
  • FITS POLARIS UTVS: This full-tilt windshield is compatible with Polaris Ranger 570/900/1000 and Polaris Brutus UTVs (it does not fit 570 mid-size variations or round roll variations ).
  • ADJUSTABLE SHIELD: The windshield can be set in the downward position for trailer travel, and it can be readjusted back up into the full position when you need it. (Best of both worlds half when you want and full when you need.)
  • HEAVY-DUTY MATERIALS: This durable windshield is made from strong polycarbonate. This is the same material used in both airplane windshields. (impact resistant which comes in handy on a UTV)
  • QUALITY PROTECTION: This windshield provides optimal protection against dust, wind, bugs, sand, mud, rain, and other debris that can be present while driving your Polaris UTV. (versatility when riding if it gets dust tilt down and cold tilt up)
  • NO BOUNCING OR RATTLING: This shield is held down with black-coated, stainless-steel clamps, nuts, bolts, washers, and rubber stoppers that keep the windshield from shaking or moving while you drive. (Securely connected to your UTV: We have had customer brackets made specifically for the proform roll bar. This will keep your windshield securely attach and minimize bouncing or rattling)

Pros

  • Made from polycarbonate material
  • Strong and Durable
  • Foldable
  • Full windshield adjustment

Cons

  • Likely issue with the brackets on the windshield and the nuts provided
  • Snug fit issues with most UTVs

4. SuperATV Heavy Duty Scratch Resistant

Here comes a dynamic package in the SuperATV Heavy Duty Scratch Resistant. It comes with three windshields which can be fully closed, vented or fully opened, and half windshield. It comes preassembled with little installation left for you to do.

The windshield is made with one of the hardest materials used for the windshield, and it is polycarbonate. It is well coated and scratch-resistant, high abrasion, UV rays resistant and chemical resistant. The sturdiness makes it viable for both smooth and rough rides.

SuperATV Scratch Resistant 3-1 Flip Windshield For 2019-2023 Polaris RZR XP 1000 / XP 4 1000 | 250X Stronger than Glass | Open, Vented Or Fully Closed | USA Made | Without Ride CommAnd
55 Reviews
SuperATV Scratch Resistant 3-1 Flip Windshield For 2019-2023 Polaris RZR XP 1000 / XP 4 1000 | 250X Stronger than Glass | Open, Vented Or Fully Closed | USA Made | Without Ride CommAnd
  • Fits: 2019-2023 Polaris RZR XP 1000 | 2019-2023 Polaris RZR XP 4 1000 | Can Be Used With Most Soft Or Hard Tops | Note: SuperATV does not recommend keeping Windshield installed while transporting on an open air trailer. Secure with straps or remove. | Without ride command
  • Great For All Weather: Want A Rzr Windshield That Works In All Conditions? Our 3-In-1 Flip-Up Design Allows You To Choose From Closed, Vented, Or Open Positions To Ride Comfortably In All-Weather Without Having To Leave Your Seat
  • Virtually Indestructible Material: Made Of 1/4 Inch Thick Scratch-Resistant Polycarbonate That Is Shatter Resistant And Designed For Off-Roading | 250 Times Stronger Than Glass & 25 Times Stronger Than Acrylic | Made In The Usa!
  • Installation: 100% Fitment Guaranteed | Easy To Install - Comes Pre-Assembled With All Necessary Hardware And Instructions | Rattle Free-Fit | Remove Protective Film From Both Sides Of Shield Prior To Use

Pros

  • Hard coated on all sides
  • UV rays, scratch resistant and chemical resistant
  • Strong and durable
  • Protect against a strong wind

Cons

  • It comes with no instruction on how to install

5. Can-Am Commander Half UTV Windshield

You should consider Can-Am Commander Half UTV Windshield if you go out in the wood often with your UTV. The windshield is the perfect choice for all UTV riders considering the protection and safety you can get from it.

It is made with the same materials that aeroplane windshield is made from and that shows you how strong and durable it is to handle the toughest condition or pressure of daily task. The appealing part of the windshield is that it is easy to install on any UTVs.

Compatible with Can-Am Commander Half UTV Windshield 3/16' - Fits 2020 and Older Models - Made in the USA!
20 Reviews
Compatible with Can-Am Commander Half UTV Windshield 3/16" - Fits 2020 and Older Models - Made in the USA!
  • DURABLE POLYCARBONATE MATERIAL - This is the same Material used in Nascar and Airplane Windshields so you can rest assured this Can-Am Commander UTV Half Windshield will withstand even the toughest challenges
  • TRAILERABLE TRAVEL - Tested wind resistance up to 80 mph! (Not rated for road debris at 80 mph)
  • QUICK & EASY INSTALLATION - No drilling necessary to install and all hardware, instructions and reference install video provided.
  • WE ARE THE MANUFACTURERS - Built in the USA with the highest quality standards. Not an overseas reproduction. 2-year manufacturer defect warranty

 

Pros

  • Quick and easy installation
  • Polycarbonate material
  • Tough for any condition
  • Protect against UV rays, wind and rain

Cons

  • It has no significant setback

 

6. SuperATV Heavy Duty Clear Non-Scratch Resistant

Here is another windshield you can consider for your UTV. It fits Fits Polaris RZR XP 1000 / XP 4 1000 2019 models. It is made from Lexan material, which is about 200 times stronger than glass, and that will help to protect you from heavy impacts from external forces.

The windshield is durable and reliable for all kind of rigour for each task you have. It offers maximum protection to protect you from wind, sunray, and chemicals. Installing the windshield on the UTV is easier to do, and it comes with instructions to make it easier.

SuperATV Heavy Duty Full Windshield for 2019+ Polaris RZR XP 1000 / XP 4 1000 | 1/4' Thick Clear Standard Polycarbonate 250x Stronger than Glass and 25x Stronger than Acrylic | USA Made
160 Reviews
SuperATV Heavy Duty Full Windshield for 2019+ Polaris RZR XP 1000 / XP 4 1000 | 1/4" Thick Clear Standard Polycarbonate 250x Stronger than Glass and 25x Stronger than Acrylic | USA Made
  • Fits: 2019+ Polaris RZR XP 1000 | 2019+ Polaris RZR XP 4 1000 | Can be used with most soft or hard tops
  • Perfect Fit: Our RZR Full Windshield is cut right here in Madison, Indiana and matches the contours of your machine perfectly. You get the fit you need and, thanks to the full length seal, you keep the air, dust, and rain out of your cab
  • Virtually Indestructible Material: Our RZR Windshield is made of 1/4 inch thick clear polycarbonate that is shatter resistant and designed for off-roading | 250 times stronger than glass and 25 times stronger than acrylic | Protects against debris and the elements | Made in the USA!
  • Installation: SuperATV's Polaris RZR XP 1000 Windshield / Polaris RZR 4 1000 Windshield comes complete with all necessary hardware for ease of installation | Fits the contours of your cage and hood perfectly

Pros

  • Easy to install
  • UV Ray, Chemical, Sun resistant
  • Very strong and durable
  • Long-lasting

Cons

  • Not resistant to scratch

7. Kubota RTV 400 and RTV 500 Full Non-Vented Windshield

The last we have here on our list is the Kubota RTV 400 and RTV 500 Full Non-Vented Windshield. If you are on the lookout for a vented windshield, you should overlook it. It comes non-vented, and it’s viable or perfect for Kubota RTV 400 and RTV 500.

It is made from ¼ inch clear polycarbonate Lexan material which makes it durable and reliable. It comes with all clamps and screws which are made with rust-free material. The installation is simple and easy to do for anyone.

Pros

  • Quick and simple installation
  • Strong and long-lasting
  • Clear and offers maximum protection

Cons

  • Non-vented

Conclusion

On this best utv windshield article, we hope we have been able to give answers to all your questions. We ensure to pick from the best to ensure you have no cause to regret your decision for trusting our review. The windshield is essential to UTVs, and above are top choices for you to make.

 

 

 

 

Best UTV Battery – Buyer’s Guide and Expert Review 2024

Best UTV Battery

Just as oxygen is essential to the heart to pump blood into circulation, the same way a quality battery is essential to UTVs. The battery is the power source of every UTV engines, and that is why you need the best utv battery to keep your four-wheeler in reasonable control.

There is no amount of magic you can do to get a UTV in motion without a battery except if you want to push it around. That shows you how important a battery is to any UTV. It is essential you get a perfect one to meet the requirement of your UTV.

Things to consider when buying UTV battery

There are mistakes people make when buying a battery for their UTVs, and you should not make the same mistake. It is why you should follow these essential factors that you need to consider to help you make the right call carefully

Choosing the right measure of Cold Cranking Amps (CCA)

The CCA means cold cranking Amps. It is used to describe the level of power in a battery. It means the higher the CCA, the more your UTV engine will work optimally. You should consider the right CCA rating for your UTV engine.

If you get a battery with lower CCA rating to the demand from your UTV engine, it will work below par, and you might get frustrated with your level of productivity with whatever you do.

The brand of the Battery

There are many batteries out there in the market, and you need to be careful not to make the wrong call. You should get familiar with the brand or manufacturer and choose from the best in the industry as that will help you save stress and resources.

Choosing the correct fit for your ATV

You should be more concerned about choosing the right battery that fits your UTV. Check the size and ensure it will fit your vehicle without any need for adjustment. Also, you should never opt for a used battery over a new one for no cause.

Types of battery

You need to understand what you want. There are different types of batteries out there in the market. We have the lead battery and the acid type. The lead is rechargeable and doesn’t need a refill, but with the acid types, you need no refill with acid. I prefer the lead because it has no risk attached and quite easy to maintain.

Best UTV Battery Reviews

1. Odyssey PC680 Battery

This battery is undoubtedly one of the best you should consider considering its non-spillage design. The battery comes with all that is needed to save you time, energy and money. Users have the grace to enjoy the batter for a more extended period with its 3 to 10 years offer of service life.

It takes about 4 to 6 hours to get the battery well charged. It works effectively after it is fully charged. The design ensures it comes with a non-spillage capacity, which makes it safe and easy to mount. It is resistant to vibration, shock, and excessive heat.

Sale
ODYSSEY PC680 Battery, red top
601 Reviews
ODYSSEY PC680 Battery, red top
  • 170 CCA; Better warranty: Limited 2-year full replacement warranty, not pro rata; Longer service life: With 3-10 years of service life, ODYSSEY batteries save consumers time, money, and aggravation
  • Longer cycle life: 70 percentage longer cycle life compared to conventional deep cycle batteries, up to 400 cycles at 80 percentage depth of discharge- high stable voltage for longer periods of time
  • Faster recharge: The highest recharge efficiency of any sealed lead battery on the market, capable of 100 percentage recharge in 4 - 6 hours; Mounting flexibility: Non-spillable design
  • Vibration resistance- design protects against high impact shock and mechanical vibration; Extreme temperature tolerant
  • This item is not for sale in Catalina Island

Pros

  • Protection against high impact shock
  • Easy to mount
  • Non-spillage design
  • Extreme temperature tolerant
  • Faster recharge capacity

Cons

  • The charge life reduces over months of consistent use

 

2. MMG YIX30L-BS Battery

Looking for a versatile battery that can work effectively on almost all UTVs, you should consider MMG YIX30L-BS Battery. It is perfect with utility vehicles such as UTV Polaris Ranger 4×4 6×6 400 425 500 570 700. It comes with spill-proof design to keep you and your UTV engine safe.

The battery has 30 Ah capacity and can work under CCA 400 condition. It is not heavy to carry and mounting on any UTV is easier to do. It takes 4 to 6 hours to get it fully charged. One of the right sides of the battery is that it is straightforward to maintain.

MMG YIX30L-BS Battery 12v 400 CCA for Utility Vehicles UTV Polaris Ranger 4x4 6x6 400 425 500 570 700
17 Reviews
MMG YIX30L-BS Battery 12v 400 CCA for Utility Vehicles UTV Polaris Ranger 4x4 6x6 400 425 500 570 700
  • MMG YIX30L-BS High Performance Maintenance Free Battery
  • Voltage 12v | Capacity 30Ah | CCA (-18⁰ C) 400
  • Dimensions (±2mm): 166mm x 126mm x 175mm | 6.5625" x 5" x 6.875"
  • Polarity: -|||||+ | Amps: 3.0 | Aprox Weight 22 lbs
  • Fast Free Shipping from US locations

 

Pros

  • Maintenance free
  • Spill proof design
  • Versatile use
  • Strong and durable
  • Last longer for an extended period with a quality life span

Cons

  • It has no significant setback

 

3. BatteryMart Mega Crank

The good about the battery is that you can get to use it the very moment you get it. It comes fully charged, which makes it possible to use even without charging it. It is a maintenance-free battery, which means you have lesser work to do to keep it safe.

It has smooth and easy to install design. It is leak-proof, spill-proof, resistant to vibration and shock. The battery has the capacity of 30ah and 420 cold-cranking amps, and luckily enough, the battery is a utility type that can be used for a wide range of vehicles.

BatteryMart Mega Crank MTX-30L AGM Maintenance Free Battery
18 Reviews
BatteryMart Mega Crank MTX-30L AGM Maintenance Free Battery
  • AGM 410CCA 12V 30 Ah 6.65"L x 5.16"W x 6.89"H
  • Ships fully charged ready to install out of the box (Bolts included)Environmentally friendly, 100% recyclable
  • Leak-proof, Spill-proof, Vibration Resistant, Easy Install Design
  • Replaces 0445-081, 1436-358, 1436-691, 278001763, 278001866, 278001882, 4010595, 4010630, 4011224, 4013129, 4014609, 4140012, 515176151, 515177836, 53030, 533030H, 6012622, 66010-97A, 66010-97B, 66010-97C, B3121, BAB30-12, BRL-B3121, BTX-30L, C60-N24AL-B, C60-N30L-A, CB30CL-B, CB30L-B, CIX30L, CTX 30L BS, CTX-30L-BS, CYIX30L-BS, E04987, E04990, ETX30L, FAYIX30L, GNBSC30LFA, K26012-1005, M22H30, M6230X, M7230L, MOSM6230X, MOSM7230L, MTX-30L, MX30-3, PIX30CLBS-FS, PIX30HLBS-FS, PIX30LBS, PIX30LBSF

Pros

  • Shock and vibration resistance
  • Spill-proof and non-spillage design
  • Strong and versatile

Cons

  • It has no significant setback

4. Energizer ETX24HL AGM Motorcycle

Are you still worried about the perfect type of battery you should get your UTV? The ideal solution is here for you in Energizer ETX24HL AGM. It is a powerful and reliable battery that can effortlessly handle the pressure and demands of energy from high-performance engines.

The battery comes fully charged from the manufacturer, and you just set to use once you get it. It also comes with a non-spillage design, and it features absorbent glass mat technology which ensures the battery get charged with no form of hazard.

Energizer TX24HL AGM Motorcycle and ATV 12V Battery, 350 Cold Cranking Amps and 21 Ahr, Replaces: YTX24HL-BS and others
14 Reviews
Energizer TX24HL AGM Motorcycle and ATV 12V Battery, 350 Cold Cranking Amps and 21 Ahr, Replaces: YTX24HL-BS and others
  • Strong, reliable power for high-performance engines, precision charged and performance ready out of the box
  • Permanently sealed at the factory and maintenance free – no topping off necessary
  • Length: 8-1/16" (205 mm), Width: 3-7/16" (87 mm), Height: 6-3/8" (162 mm), Weight: 16.01 lbs (7.26 kg)
  • Non-spillable design that features Absorbent Glass Mat (AGM) technology, enabling the battery to be repeatedly charged and discharged without affecting performance
  • Fits select models of Buell, Can-Am, Honda, Indian, Kawasaki, Suzuki, Yamaha and other motorcycles; Arctic Cat, Can-Am and Polaris ATVs/UTVs; Arctic Cat, Kawasaki, Polaris and other Snowmobiles. Replaces: CTX24HL (FA), YTX24HL, M7250H, SC24HLFA, ETX18L, FAITX24HL, MB YTX24H-3, LTX24HL-BS, EBX24HL-BS, 44006, PIX50L-BS, 740-1889, GTX18L-BS, CTX18L-BS, CTX24HL-BS, M6250H, YTX24HL-BS, TX24HL

Pros

  • Shock resistant
  • Non-Spillage design
  • Quality materials
  • Perfect for tough engines
  • Durable and strong

Cons

  • Takes about 8 hours and more to get fully charged

5. ACDelco AB14AA2

If you are on the lookout for a durable battery with great performance rate, you should consider ACDelco AB14AA2. Nothing is so special as getting a quality battery for your UTV, and this is just one of the best to consider.

The battery comes dry and unfilled, which helps to improve the shelf life. You are in the position to fill with acid, and it comes with a convenient acid bottle with right amount of acid for the battery. It has removable vent caps, which makes it easy to use and the exhaust vent tube is viable to relieve excessive gas pressure and fumes safely.

ACDelco Gold AB14AA2 12 Month Warranty Powersports JIS 14A-A2 Battery
58 Reviews
ACDelco Gold AB14AA2 12 Month Warranty Powersports JIS 14A-A2 Battery
  • Formulated for durability and performance
  • Convenient acid bottle for the correct amount of acid for the battery, no left over acid to be disposed
  • This battery is shipped dry and unfilled which gives the product a very long shelf life
  • Removable vent caps which allow for easy service
  • Exhaust vent tube relieves excess gas pressure and fumes safely

Pros

  • Durable and strong
  • Perfect for all kind of motorcycle
  • Lightweight and easy to mount

Cons

  • Comes with battery fluid, and it’s poisonous
  • Get weak easily

6. Mighty Max Battery

If indeed you are serious about getting a versatile battery that serves a wide range of purposes, you should consider Mighty Max Battery. The battery can meet up with any demand from all kind of utility vehicle. It can be mounted in any position as much as it is easier to install.

The battery design makes it resistant to shock, resistant to vibration and controls heat dissipation, which makes it work optimally under high and low temperatures. It is maintenance-free, and you do not need acid pack, unlike the ACDelco AB14AA2 battery.

Mighty Max Battery 12V 35AH Gel Replacement for Yamaha Rhino Utility Vehicle UTV
3 Reviews
Mighty Max Battery 12V 35AH Gel Replacement for Yamaha Rhino Utility Vehicle UTV
  • ML35-12GEL is a 12V 35AH GEL rechargeable maintenance free battery.
  • Dimensions: 7.68 inches x 5.16 inches x 7.13 inches. Listing is for the Battery and Screws only. No wire harness or mounting accessories included.
  • True deep cycle battery that can be mounted in any position, Resists shocks and vibration. Long lasting high performance in high and low temperatures.
  • Factory activated GEL battery. Maintenance free. No acid pack needed. Advanced design works right out of the box and requires no maintenance yet offers the option to prolong the standard life by adding extra electrolytes.
  • Backed by a 30 day refund policy and full 1 year warranty.

Pros

  • Pre-charged
  • Maintenance free
  • Prolong standard lifespan
  • Gel rechargeable
  • Easy to mount on any position

Cons

  • It has no significant setback

7. MMG YB16CL-B 16CL-B Heavy Duty Powersports 12v Battery

The MMG YB16CL-B 16CL-B Heavy Duty Powersports 12v Battery is a vented battery which means it makes use of pressure release valve to allow gases released during its operation to escape into the atmosphere to ensure the battery doesn’t rupture.

It comes dry with its acid package, and it is spill-resistant. You have to fill with the acid before you can set the battery on use. It is viable or perfect for all kind of automobile and it last longer.

MMG YB16CL-B 16CL-B Heavy Duty PowerSports 12v Battery ATV UTV Jetski Watercraft
20 Reviews
MMG YB16CL-B 16CL-B Heavy Duty PowerSports 12v Battery ATV UTV Jetski Watercraft
  • MMG YB16CL-B "Spill Resistant" Vented battery
  • Comes dry with an enclosed acid bottle to activate it. Written Instructions Included
  • 12 Volt, 19 amp-hour extra plate battery, 240 CCA
  • High quality battery (Not Yuasa) to replace YB16CL-B
  • Replaces: CB16CL-B, GM16AZ-3B, M2S6CL/M3S6CL, 740-1862, 44001, ES16CLB

Pros

  • Spill-resistant
  • Vented battery
  • Enclosed acid battery

Cons

  • The acid is poisonous

 

8. MMG Lithium-Ion – Best utv lithium battery

How do you feel with having a battery that can withstand any rigour from the different motorcycle with a year maintenance-free option? That is precisely what you get from the MMG Lithium-Ion ATV UTV Battery. It is a lead battery with the exceptional life cycle.

The battery can easily mount on any compartment, and it has an incredible fast recharge rate. It can fit into any motorcycle and will work effectively. It is lightweight and easy to move from one place to another. It has a stable discharge voltage and also lowers internal resistance.

MMG Motorcycle Battery Lithium Ion (YIX30L-CCA 480)
6 Reviews
MMG Motorcycle Battery Lithium Ion (YIX30L-CCA 480)
  • MMG Lithium-Ion Battery: Extremely LIGHTWEIGHT, 50% to 70% lighter than standard batteries.

 

Pros

  • No acid or spillage
  • Waterproof design
  • Fully charged from the factory

Cons

  • None

9. Mighty Max Battery U1 12V 35Ah Yamaha Rhino Utility Vehicle UTV Battery

We have another mighty max battery here on our list, and it is Mighty Max Battery U1 12V 35Ah Yamaha Rhino Utility Vehicle UTV Battery. The battery is a sealed lead type that comes with rechargeable options.

The battery can be mounted in any position on your UTV. It has a non-spill and waterproof design with quality features such as the high discharge rate, long life span, wide operating temperatures and deep discharge recover.

Mighty Max Battery U1 12V 35Ah Yamaha Rhino Utility Vehicle UTV Battery
52 Reviews
Mighty Max Battery U1 12V 35Ah Yamaha Rhino Utility Vehicle UTV Battery
  • ML35-12 SLA is a 12V 35AH Sealed Lead Acid (SLA) rechargeable maintenance free battery - UL Certified
  • Dimensions: 7.76 inches x 5.12 inches x 7.01 inches. Listing is for the Battery and Screws only. No wire harness or mounting accessories included.
  • SLA / AGM spill proof battery has a characteristic of high discharge rate, wide operating temperatures, long service life and deep discharge recover.
  • Rechargeable battery that can be mounted in any position, resists shocks and vibration. Long lasting high performance in high and low temperatures.
  • Backed by a 30 day refund policy and full 1 year warranty.

Pros

  • Shock and vibration resistant
  • High performance in high and low temperatures
  • Durable and lightweight
  • No acid or spillage

Cons

  • None

10. PowerSource battery

Looking for a high-performance battery for your UTV and some other motorcycles, you should look no further as the powerSource battery is a perfect choice for you. This is a maintenance-free battery that can be used for as long as you intend with its high-performance starting power.

It is a battery that requires no acid or any refill. It is the lead style battery that you have to mount on your UTV and set for work. The good part of it is that it comes fully charged with all that is left to do is to start using it.

YTX12-BS, GTX12-BS, FTX12-BS, YTX12, ES12BS, 4011434 Replacement Battery 220cca High Performance WP12-BS Sealed AGM for Honda, Kawasaki, Suzuki, Yamaha, Triumph, Kymco, Polaris, Vespa, Piaggio Motorcycle, Scooter, ATV, UTV, Generator
24 Reviews
YTX12-BS, GTX12-BS, FTX12-BS, YTX12, ES12BS, 4011434 Replacement Battery 220cca High Performance WP12-BS Sealed AGM for Honda, Kawasaki, Suzuki, Yamaha, Triumph, Kymco, Polaris, Vespa, Piaggio Motorcycle, Scooter, ATV, UTV, Generator
  • Sealed AGM Maintenance-Free, no acid water needed, never needs re-filling
  • Factory Activated
  • High Performance Starting Power
  • OEM compatible replacement battery
  • Polarity | + ||||| - |

Pros

  • Utility battery for all kind of vehicle
  • No acid and no spillage
  • Resistant to shock and vibration

Cons

  • None

11. Mighty Max Battery YTX4L-BS

The Mighty Max Battery YTX4L-BS is undoubtedly one of the best batteries for big engines. It has all that it takes to power both small and big engines of any motorcycle. The battery requires no wire, and it needs no mounting accessories as it is easier to mount on any battery compartment on your vehicle.

The battery has excellent discharge rate to keep the engine in optimal condition. It has excellent design which makes it resistant to shock and vibration. It has wide operating temperatures, deep discharge recovers, and it works effectively on low and high temperatures.

Mighty Max Battery YTX4L-BS Replaces Motorcycle Scooter ATV Batteries
177 Reviews
Mighty Max Battery YTX4L-BS Replaces Motorcycle Scooter ATV Batteries
  • YTX4L-BS is a 12V 3AH 50 Cold Cranking Amps (CCA) Sealed Lead Acid (SLA) Battery
  • Dimensions: 4.40 inches x 2.90 inches x 3.42 inches. Polarity: Negative on left, Positive on right. Listing is for the Battery and Screws only. No wire harness or mounting accessories included.
  • SLA / AGM spill proof battery has a characteristic of high discharge rate, wide operating temperatures, long service life and deep discharge recover.
  • Rechargeable battery that can be mounted in any position, resists shocks and vibration. Long lasting high performance in high and low temperatures.
  • Backed by a 30 day refund policy and full 1 year warranty.

Pros

  • Effective on both low and high temperatures
  • Mounted in any position
  • Resists shocks and vibration
  • High discharge rate

Cons

· None

 

 

Conclusion

Choosing the best UTV battery is very important as to buying a quality UTV. Of what good is having a quality UTV with a bad battery? It will weaken your UTV engine and then lead to damages which could have been avoided.

With the list above, you can always make the right choice.

Best UTV Winch – Buyer’s Guide And Expert Review 2024

Best UTV Winch

If you ever have to work or travel with your UTV, a winch is one of the essential tools you should never leave behind. It is a device that can help you out from unpleasant conditions such as when you UTV get stuck in the mud. This post on best UTV winch covers all on what you need to know.

There are different products out there, and you should be watchful not to pick up the wrong product. This is why we have made the list of the top-quality products and then leave you with a guide to help you make the right call.

Best UTV Winch -Buyer’s guide

So, there are some factors that every buyer must consider when buying UTV winch and you should look out for it whenever you are about to buy one.

They are:

Load capacity

The load capacity of your winch is an essential factor you should consider. It must have the ability to withstand the weight of your vehicle for it to successfully pull it out from any place. This is why you must get a winch with higher capacity.

You should know the size of your UTV, and that will help you in choosing a winch that fits perfectly. There are different winches in the market, and they vary in size and capacity from 1000, 1500, 2000, 3000 pounds capacity.

Winch mounting plate

The next to consider is the winch mounting plate. The plate is what makes it easier for you to mount the winch on your UTV without any hassle. So, one of the things you should consider is where you will install the winch on your UTV, and the plate will determine that.

It is advisable that you opt or a universal winch. A universal winch plate will allow you to mount on your UTV irrespective of the design of your vehicle. Therefore, if you don’t want to worry about the size, design, or how you can mount your winch on your UTV, you should get the one with the universal plate.

Winching kit

While you are buying your UTV winch, you must consider getting the winching kit too. There are times you will have to do the work yourself, and you need some kits to make it easier for you, and also keep you safe.

Among those you should never overlook is the glove that will keep your hand free from blisters, tree protector wrap, D ring, carrying bag and snatch block which increases the capacity of your winch for double power pull.

Price

The price of the winch is one other factor you should consider. Most do come expensive and while some are relatively cheap. You should go for a quality winch, so you do not have to invest in another one very soon.

Our Choosen Top UTV Winch

1. Champion 3000-lb. ATV/UTV Winch Kit

There are instances where your UTV tire will fail you in the mud, and your vehicle will get stuck amid the wood with no visible option to get it out, then you need one of the best winches, and one to consider is the Champion 3000-lb. ATV/UTV Winch Kit.

The Winch is powered by 1.3-horsepower (12-volt) DC permanent magnet motor and controlled by a remote device. It has a line pulling capacity of about 3000 pounds, which can conveniently drag UTV and ATV weighing about 13004 3000 pounds.

The Winch comes with 46 foot by 3/16-inch galvanized super duty aircraft cable that is strong to handle the rigor and pressure from any UTV without fraying even when used in high abrasive terrains like in the mud, stone or rocky terrain.

The ever-durable aircraft cable is seen secured onto the 1.5 by the 3.2-inch drum. All that the Winch is made of are of top quality, which makes it easier to start winching without hassles. Also, it has a safety measure to ensure not only the winch device is safe, but the controller or user is safe too.

Pros

  • Remote control included for easy operation
  • Very strong and durable
  • Perfect for the toughest task
  • Powered by heavy-duty motor
  • Efficient planetary gear and dynamic braking systems

Cons

  • Not to be used in water territory
Champion 3000-lb. ATV/UTV Winch Kit
493 Reviews
Champion 3000-lb. ATV/UTV Winch Kit
  • Powerful – 3000 lb. max rated line pull and 1 HP permanent magnet motor
  • Bonus Accessories – Roller fairlead, mounting channel, handle bar mounted remote control
  • 49 ft. super duty aircraft cable with rugged, latched clevis hook
  • Efficient planetary gear and dynamic braking systems
  • Champion Support - 2 year limited warranty with FREE lifetime technical support

2. Smittybilt 9500 lb 97495 XRC GEN2 Winch

It is better not experienced without having a winch on your UTV. I mean, having your UTV stuck somewhere can be disheartening and heartbreaking, especially if you do not have a winch with no other means to get out of the mess.

It is why every UTV rider must have a quality winch. For those interested in a winch with ample capacity of about 9500 pounds load capacity and a lot of power to drag out UTVs from a messy condition, the Smittybilt 9500 lb 97495 XRC GEN2 is the right choice for you.

The powerful Winch is powered by a 6.6 horsepower amphibious motor and controlled with a viable remote system. With the three stages planetary gear system, you can easily get your UTV out of any difficult condition without stress.

The winch device comes with all that is needed to make it works well. All the wiring required for installation is intact with the battery. It comes with an instruction manual to help you have a smooth operation with the Winch, even if it is your first time using it.

Pros

  • It comes with an instruction manual
  • Completely waterproof
  • Easy to install and use
  • Remote control switch

Cons

  • Might experience a little manufacturer defect
Smittybilt GEN 2 XRC Winch | 9,500 Pound Load Capacity
1,705 Reviews
Smittybilt GEN 2 XRC Winch | 9,500 Pound Load Capacity
  • Your purchase includes One Smittybilt GEN2 XRC Winch, 97495 model with 9,500 lbs. load capacity
  • Winch dimensions: 22.3” L x 5.4” W x 9.4” H | Product Weight: 78 lbs. | Weight capacity: 9,500 lbs. | Cable type – 93.5” diameter, Wire rope | Motor – 6.6hp | Control – 12” lead | Gear-train – 3-stage planetary | Fairlead – 4-way roller
  • Completely Waterproof, state-of-the-art 500AMP Solenoid
  • Kit comes complete with all wiring required for installation. Smittybilt recommends using supplied wiring
  • Smittybilt offers a limited lifetime for replacement to the original purchaser on stainless steel products. Dual-stage, powder coated products carry a 5-year or 100,000 mile warrany, whichever comes first

3. Smittybilt 98510 X2O Waterproof Synthetic Rope Winch

You need a powerful winch with a lot of capacity to handle your UTV. It is the reason you should consider a UTV winch with lots of capacity that can handle any kind of UTV irrespective of the weight, and one of the best in the market is the Smittybilt (98510) X2O with 10000 pounds load capacity.

The Winch commands a 6.6 horsepower motor that makes it easier for you to get your UTV out at a fast speed using the control remote device that comes with it. It is convenient to use, and it offers you amazing options to use on any vehicle, which makes it a utility winch.

The design is alluring, and the material it is made of makes it durable and strong to handle the toughest condition. The cable, the drum, the gear, and wiring that comes with the Winch ensures that you have a smooth operation with the device, and you should not overlook the powerful battery too.

Without a doubt, operating the vehicle winch is not s difficult task to do. Also, unlike some winch that you have to take off a muddy environment so as not to get damaged, the Smittybilt (98510) X2O can work anywhere since it comes with synthetic waterproof winch rope.

Pros

  • Resistance to water
  • Durable and strong
  • Great load capacity
  • Powerful motor
  • Wireless remote device

Cons

  • It has no significant setback
Smittybilt X2O COMP - Waterproof Synthetic Rope Winch - 10,000 lb. Load Capacity
1,067 Reviews
Smittybilt X2O COMP - Waterproof Synthetic Rope Winch - 10,000 lb. Load Capacity
  • Your purchase includes: Smittybilt X20 Comp Synthetic Rope Winch, hawse fairlead with forged hook, All required power cables to hook up to your vehicle, Rope Sleeve and Wireless Remote
  • Winch can be operated with the remote or manually
  • Technical Specification: 6.6 HP Amphibious motor, 3-Stage Planetary Gear System, Stainless Steel Hardware, Dynamic Braking System, 2 Solenoid Mounting Options
  • Lifetime Mechanical Warranty, 5 Year Electrical Warranty
  • Overall Dimensions: 22.3"L x 5.4"W x 9.4" H. Mounting Bolt Pattern: 10” x 4.5”. Net weight: 67lbs.

4. Superwinch 1135220 Terra 35 3500lbs/1591kg Winch

If you are on the lookout for a strong winch to add to your UTV gears, then you should consider Superwinch 1135220 Terra. The Winch has almost everything you need to drag your UTV. Its massive copper windings, sealed bearings end to end show it means business with how it operates.

It comes with a powerful sealed 1.6 horsepower permanent magnet motor that has high efficiency, low amp draw, and features mechanical load holding with dynamic brake. It comes with 50″ of 13/64″ steel wire rope and ergonomic cam action free spooling clutch, which makes it effortless to use.

The winch machine is controlled using the handheld remote device. This device is Terra 35, and you have other options to choose from. However, it has a load capacity of about 3500 pounds. Its single line is powerful enough to work wonders.

Also, it is made of high-quality material, and the steel planetary gear is twice as wide as those used by the competition. The circuit breaker is protected to ensure the Winch works optimally and last longer. It offers more power, has faster cooling and better efficiency.

Pros

  • User manual for instruction included
  • Very strong and durable
  • Ideal for all kind of vehicle
  • Safe to use for anyone

Cons

  • It has no significant setback
Sale
Superwinch 1135220 Terra 35 3500lbs/1591kg single line pull with roller fairlead, handlebar mnt toggle, handheld remote
1,520 Reviews
Superwinch 1135220 Terra 35 3500lbs/1591kg single line pull with roller fairlead, handlebar mnt toggle, handheld remote
  • High efficiency, low amp draw, sealed 1.6 hp permanent magnet motor featuring mechanical load holding and dynamic brake
  • 50' of 13/64" steel wire rope and ergonomic cam action freespooling clutch
  • All steel planetary gear twice as wide as those used by the competition and utilizing machined-in, oil pocket bronze bearings
  • Solenoid:Sealed and Circuit Breaker Protected

5. Superwinch 1130220 LT3000ATV 12 VDC winch

The Superwinch 1130220 LT3000ATV 12 VDC winch is a dynamic winch that comes affordable for all UTV owners. It is a powerful winch that is made from high-quality material, which makes it rugged and durable to handle rigor and pressure from pulling UTV without breaking.

The superwinch is designed with 1.2 horsepower permanent magnet low-amp draw engine that has the luxury of capacity to offer 3000 pounds pulling rating with the help of the 50 feet of durable 3/16 inches wire rope and heavy-duty 4-way roller fairlead. It is powered using a handheld remote device.

It works very fast at removing or dragging UTV from the unpleasant condition. The pulling power is topnotch, and that makes it a great choice for UTV owners. The Winch has rugged full metal 3 stage planetary gear train.

Your safety is taken to heart as the winch design integrates braking and 100% automatic load-holding, which helps to minimize the possibility of wire rope spillage just in case there is wire rope spillage or surge.

Pros

  • Very strong and durable
  • Perfect for all kind of vehicle
  • High powerful motor

Cons

  • It has no significant setback
Sale
Superwinch 1130220 LT3000 12V DC WInch 3,000lb/1361kg Single Line Pull with Roller Fairlead, 3/16in x 50ft Steel Wire Rope, Corded Handheld Remote
1,091 Reviews
Superwinch 1130220 LT3000 12V DC WInch 3,000lb/1361kg Single Line Pull with Roller Fairlead, 3/16in x 50ft Steel Wire Rope, Corded Handheld Remote
  • Rated line pull of 3,000 pounds
  • Roller fairlead and mounting plate
  • Sealed low amperage permanent magnet motor
  • Includes both handle bar mounted rocker switch and handheld remote
  • Mechanical and dynamic brake

 

6. Extreme Max 5600.3072 Bear Claw ATV/UTV Deluxe Winch

One of the things you should consider when buying your UTV winch is the installation and how to use it. The Extreme Max 5600.3072 Bear Claw ATV/UTV Deluxe Winch offers smooth operation to any user as it comes with all that is needed to ensure it works optimally without any regret.

It is a powerful winch with a powerful motor that can power and raise load that weighs about 3500 pounds — the winch package feature 3100 lb. Bear Claw winch, 45′ steel cable, roller fairlead, snatch block, mounting hardware, battery cable, motor cable, and connectors; extreme max bear claw 5600.3072 high output 3100 pounds With 2800 pounds footprint ATV/Utility deluxe Winch.

One of the interesting aspects of the Winch is that it doesn’t make noise; it is highly efficient in pulling all kinds of vehicles. It has four-bolt mounting, which gives a wide range of use on any kind of vehicle. It makes it a versatile winch.

Also, the design integrates the braking system and the triple planetary gearbox that is sealed. The Winch is resistance to water.

Pros

  • Installation is swift
  • Very strong and rugged to pull heavy loads
  • Durable and long-lasting

Cons

  • It has no significant setback
Sale
Extreme Max 5600.3072 Bear Claw ATV/UTV Deluxe Winch Package - 3100 lb
77 Reviews
Extreme Max 5600.3072 Bear Claw ATV/UTV Deluxe Winch Package - 3100 lb
  • Includes 3100 lb. Bear Claw winch, 45' steel cable, roller fairlead, snatch block, mounting hardware, battery cable, motor cable and connectors; Extreme Max Bear Claw 5600.3072 High Output 3100 lb. with 2800 lb. Footprint ATV/Utility Deluxe Winch Package
  • 3600 lb. of pull in 3500 lb. footprint, with low amp draw, high efficiency and low noise
  • Dynamic braking system and triple planetary gear box; sealed for water resistance
  • 4-bolt mounting provides a universal fit for all brands of winch mounts
  • 2-year replacement warranty

 

7. WARN 89040 Vantage 4000 Winch

The importance of a winch can never be overlooked, and it is more important that you get the best in the market to handle your UTV conveniently. The WARN 89040 Vantage 4000 Winch is well built with high-quality material, which makes it strong and durable to handle the toughest condition.

The Winch comes with all that is needed to pull load effortlessly without any hassles. It has powerful motor that supports the rope to pull load weighing about 2000 pounds. The powerful magnet motor of the Winch delivers fast, quiet, and reliable pulling power. It gives it the strength to handle the toughest task of pulling a heavy load. The design of the Winch integrates handlebar-mounted mini rocker control for easy mounting. The redesigned powder-coated hawse fairlead helps to reduce rope wear even when used regularly.

You are assured of maximum winching control with the assistance of the gear train and brake. The design of the Winch is something not to overlook as it comes with corrosion-resistant finish with stainless steel fasteners and clutch lever.

Pros

  • Dash-mounted control switch allows for easier controlling of the Winch
  • It has mini-rocker switch mounts to handlebars which gives the user maximum access controlling winch
  • Very strong and durable
  • Simple and fast to use

Cons

  • None
WARN 89040 Vantage 4000 Winch - 4000 lb. Capacity
289 Reviews
WARN 89040 Vantage 4000 Winch - 4000 lb. Capacity
  • Fully sealed motor and drive train to keep the elements out; Clutch (Freespool): Cam Activated
  • Three-stage planetary gear train for smooth, efficient operation, mechanical spring brake for control while winching
  • Includes handlebar-mounted mini rocker switch and corded remote control
  • Warranty: 5 year mechanical, 1 year electrical

 

8. KFI Products A2500 ATV Winch Kit

The KFI Products A2500, ATV Winch Kit, works effectively in getting vehicles out of different places such as in the mud, snow, and winding trail. The Winch is well designed with top quality material, which makes it strong to handle pressure and the toughness of pulling UTV and any vehicle.

It is boosted with 1.2 horsepower motor that has a 171:1 gear ratio all-metal planetary gear drive. It comes with 45.9 inches aircraft-grade wire that is strong and durable to pull load weighing about 2500 pounds. The motor and other elements of the Winch is well secured to ensure water doesn’t get into it.

The Winch features top cast aluminum and steel components. It comes with all that is needed to drive out stuck vehicle from any rocky or muddy trail. The system of the Winch is easier to understand even unto how you can mount on your UTV.

Pros

  • Very strong and durable
  • Powerful motor for superior efficiency
  • Perfect for all vehicles
  • Last longer and doesn’t wear or tear
  • Easy to install and use

Cons

  • None
KFI Products A2500 ATV Winch Kit - 2500 lbs Capacity
21 Reviews
KFI Products A2500 ATV Winch Kit - 2500 lbs Capacity
  • KFI 1-Year Limited Warranty
  • Water Resistant seals to keep the elements out
  • 1.2 HP motor with 171:1 Gear Ratio All Metal Planetary Gear Drive
  • 45.9' Aircraft-grade Wire, 3/16" diameter

 

9. Superwinch 1140230 Black 12 VDC LT4000ATV SR Winch

You need a winch with an ever-reliable motor that you can depend on for all kinds of work that deals with pulling all-terrain vehicle. You do not need a winch that won’t serve you better or make pulling unbearable, and that is why you have Superwinch 1140230 to thanks for the best pulling experience.

The winch material is made of high-quality touch with a smooth finish, which makes it strong to handle pressure and rigor of pulling vehicles. The Winch has the strength to handle the load with a weight capacity of about 4000 pounds.

It can conveniently drag heavy-duty vehicles thanks to its aluminum hawse and 50 inches of 3/16 inches Dyneema synthetic rope. Also, it is not one of the Winches that makes noise when in use. The sealed low amperage permanent magnet motor doesn’t make noise.

Also, as part of the measure to ensure you enjoy using the Winch, it comes with dual handlebar-mounted rocker switch and handheld remote, which makes it easier for you to control.

Pros

  • Mechanical and dynamic brake
  • Handheld control device
  • Simple to install and operate
  • Durable and strong rope for easy load pulling

Cons

  • It has no setback to its belt
Superwinch 1140230 Black 12 VDC LT4000ATV SR Winch - 4000 lb. Load Capacity
190 Reviews
Superwinch 1140230 Black 12 VDC LT4000ATV SR Winch - 4000 lb. Load Capacity
  • Sealed solenoid
  • Fit type: Vehicle Specific
  • Mechanical and dynamic brake
  • Rated line pull of 4,000 pounds

10. WARN 96815 VR 10-S Winch

The last on our list of the amazing Winch you should get for your UTV is the WARN 96815 VR 10-S Winch. You can never predict the day your UTV will get stuck in the mud or snow and tells you that a winch is an essential gear you must have in your vehicle.

The Winch is constructed with long-lasting material that can stand the test of time. It comes with a powerful and ever efficient series-wound motor that gives strength and support to the rope to conveniently pull load weighing about 10000 pounds.

It has waterproof Albright contractor control, low-profile design, which makes it a perfect choice for jeeps, trucks, SUVs, and other heavy-duty vehicles. As part of the design, the Winch comes with a one-piece tie plate for added strength and durability.

Pros

  • It has cone brake for superior control
  • Very powerful motor
  • Fast pulling and rope don’t wear or tear

Cons

  • It thus has no significant setback
WARN 96815 VR10-S Electric 12V Winch with Synthetic Rope: 3/8' Diameter x 90' Length, 5 Ton (10,000 lb) Pulling Capacity
197 Reviews
WARN 96815 VR10-S Electric 12V Winch with Synthetic Rope: 3/8" Diameter x 90' Length, 5 Ton (10,000 lb) Pulling Capacity
  • Waterproof Albright contractor control for the ultimate in reliability
  • Powerful, efficient series-wound motor
  • Best-in-class load-holding cone brake for superior control
  • Low-profile design will fit most trucks, Jeeps, and SUVs
  • One-piece tie plate replaces tie rods for added strength and rigidity.Gear Ratio: 261:1

 

Conclusion

You might find yourself in a situation where you have to pull out your UTY; at that point, the best UTV winch is the right call. So, we have given in detail all that you need to choose the right products and also leave you with the lists of the best you should consider.

 

Best UTV Helmet – Buyer’s Guide And Expert Review 2024

best-utv-helmets

Never should you compromise your safety when riding UTVs. Lots of unexpected accidents occur in which some are mild, and some are severe. It is why you should use your safety wear, and one of them is your best helmet for UTVs.

The importance of using a helmet while riding UTV can never be underemphasized. There hare record of head injuries as a result of an accident with UTVs and one of the ways to reduce the chances of such is through the use of UTV helmets.

I personally like Full face helmet’s those provides more safety. ILM Full Face is great, It’s great for quality, comfort, and lightweight, and it’s DOT Approved helmet.

Choosing The right size of your helmet

Use a measuring tape to measure around your head two-finger or one inch above your eyebrows and above the ear to the widest part of your head.

 

Helmet SizeHat SizeHead Circumference – Inches
XS6 5/8 – 6 3/420 7/8 – 21 1/4
S6 7/8 – 721 5/8 – 22
M7 1/8 – 7 1/422 3/8 – 22 3/4
L7 3/8 – 7 1/223 1/4 – 23 5/8
XL7 5/8 – 7 3/424 – 24 3/8
2XL7 7/8 – 824 3/4 – 25 1/4
Youth S/M6 1/8 – 6 1/419 1/4 – 19 3/4
Youth L/XL6 3/8- 6 1/220 – 20 1/2

UTV Helmet Buyer’s Guide

You are likely to make the wrong call if you fail to consider some important factors when buying your helmet. Well, that should not become a mountain for you to climb as we have listed some vital factors you should consider to help you make the right call.

Types of helmet

There are different types of helmets in the market. You will find a full helmet and half helmet. The full helmet covers every part of the head as the design integrates goggles. The half doesn’t have any protection to the face but only to the head. So, you should decide on the one you want and make the right choice.

Size

You must get a quality helmet but that which determines if you ever going to have a smooth experience with it is choosing the right size. Helmets come in different sizes, and that is because the head is not the same. The head of A is different from the head of B.

So, A must get a helmet that fits perfectly to have a smooth experience while riding. A perfect fit helmet should give a snug fit and should never move to and fro whenever you have it on your head. So, check the manufacturer specification on the size and choose the one that fits you.

Goggle compatibility

Some people use glasses, and if you are on those people, you might have to consider a helmet that will allow the use of glasses. Not all UTV helmet allows the use of eyeglasses, and if you can’t do without yours, then you should consider glasses compatibility.

Padding

Your comfort and convenience are parts of the things you should consider when getting a helmet. With that in mind, you need to look out for the inner padding of the helmet. Some come with foam that has a wicking system to eliminate moisture, and some do not. For safety and convenience, you should opt for the one with a padded inner and moist wicking system to keep the head dry.

Durability

You are getting a helmet not because you intend to fall intentionally but because of some unplanned occurrences. Therefore, you need to get a helmet that is strong to absorb impact from the floor to ensure your head is safe and secured.

 

Best UTV Helmet Reviews

O’Neal 0817-513 Unisex-Adult Full-face

A full-face helmet is a good bargain for those who are conversant with commuting different trails with their UTV. It offers full coverage to the face, thereby leaving you with no chance of getting injured on the face region.

The design of the helmet boasts of high-quality materials that are durable and long-lasting. One of the fantastic strengths of the helmet is the shell that is constructed with ABS material, which means it is shatterproof.

The construction of the helmet integrates moisture wicking which ensures the inner part of the helmet is comfortable for you. The liner therein is removable and washable, which shows it supports your proper hygiene lifestyle.

Sale
O'Neal 0817-513 Unisex-Adult Full-face Style Sierra II Helmet Flat White M (57/58cm) (med)
314 Reviews
O'Neal 0817-513 Unisex-Adult Full-face Style Sierra II Helmet Flat White M (57/58cm) (med)
  • Shell is constructed with ABS
  • Weight: 1590G ( 50G)
  • Moisture wicking, removable/washable air channeled comfort liner
  • Integrated face shield
  • Meets Standards: DOT, ECE 22-05 safety standards

Pros

Shell made from ABS material

Liner is removable and washable

Face shield included

Safety certified

Moisture-wicking

Cons

The visor doesn’t protect you from UV

 

O’Neal 2 Series Unisex-Adult Off-Road Helmet

The helmet is a perfect choice for adults that love to hit the trails with their UTVs or any other utility vehicle. It is one of the best you could ever desire for any kind of outdoor adventure as it gives all it takes to keep your head and every other part of your face safe.

It also comes with ultra-plush removable and washable padded liner, which means you can easily keep the liner clean after several uses, and it has a wicking system. So, with the wicking system, you do not have to continually wash the liner if you are the kind that sweat easily.

The durability and long life span of the helmet are unquestionable as it is made with high-quality material while the shell boasts of ABS material. It has a good design and features such as the Double D release chin strap, rubber roost nose guard, and it is safety certified.

O'Neal Unisex-Adult Off-Road Style 2SERIES Helmet SPYDE Orange/White XL
262 Reviews
O'Neal Unisex-Adult Off-Road Style 2SERIES Helmet SPYDE Orange/White XL
  • Shell weight (size large): 1450grams (65
  • Ultra-plush removable/washable padded liner
  • Rubber roost nose guard
  • Multiple air vents ventilation and cooling
  • Meets standards: DOT, ECE 22-20

Pros

Multiple air vents for maximum ventilation and cooling

Height adjustable visor

Strong and durable shell

It comes in different sizes and color

Cons

None

 

Motorcycle Motocross ATV Helmet

The Motorcycle Motocross ATV Helmet is one of the versatile and reliable helmets for all kinds of outdoor adventure with UTVs or utility vehicles. It is made from excellent materials, and it features Aerodynamic ABS shell, reinforced chin strap, multi-density EPS, and quick release buckle.

Your comfort and convenience are considered as it has multiple air vent to allow fresh air into the helmet, thereby eliminating the chances of the liner been soaked with sweat. Also, the inner linings are removable and of comfy material, which makes it breathable.

This is a multipurpose helmet that can be used on dirt bikes, mountain bikes, Mtv, Atv, and UTVs. It is ideal for touring and all other outdoor sports that require the use of a safety helmet. It is safety certified, and it is safe to use.

Motorcycle Motocross ATV Helmet DOT Approved - YEMA YM-915 Motorbike Moped Full Face Off Road Crash Cross Downhill DH Four Wheeler MX Quad Dirt Bike Helmet for Adult Men Women - Matte Black,XL
289 Reviews
Motorcycle Motocross ATV Helmet DOT Approved - YEMA YM-915 Motorbike Moped Full Face Off Road Crash Cross Downhill DH Four Wheeler MX Quad Dirt Bike Helmet for Adult Men Women - Matte Black,XL
  • Outstanding Materials: Aerodynamic ABS Shell, Multi-density EPS, Reinforced Chin Strap, Quick Release Buckle.
  • Designed with Multiple Air Vents and Removable Inner Linings to Ensure Breathable and Comfortable Wearing Conditions.
  • Durable Aerodynamic Helmet Suits Atv, Mtv, Dirt Bike, Motorcycle, Mountain Bike, Touring, Dual Sports and Other Outdoor Riding Activities.
  • DOT Certified for Safety - Meets or Exceeds FMVSS -218 and DOT Safety Standards.
  • Streamlined Aerodynamic Design Reduces Wind Noise and Drag.

Pros

Perfect for touring and outdoor activities

It is made from durable and long-lasting materials

Air vent for breathability

Comfy liner for convenience

Cons

None

 

 

 

Fuel Helmets SH-FF0016 Unisex-Adult Full-Face Helmet

 

Not all helmet can serve you well and keep you safe, but the Fuel Helmets SH-FF0016 Unisex-Adult Full-Face Helmet is one of those that can give you the peace of mind you deserve when cruising around with your UTV or any utility vehicle. 

The construction of the helmet is fantastic as it comes with top quality features such as the removable cheek pad for easy cleaning, the duel vented diffuser, which allows for maximum airflow to make the inner part of the helmet dry and comfortable on the head. 

The thermoplastic shell of the helmet is solid to withstand impact and ensure your head is safe and secured. So, if you are on the lookout for a durable and long-serving helmet, this helmet is one of the best options for you in the market.

Fuel Helmets SH-FF0016 Unisex-Adult Full Face Helmet (Gloss Black, Large)
537 Reviews
Fuel Helmets SH-FF0016 Unisex-Adult Full Face Helmet (Gloss Black, Large)
  • Duel vented diffuser allows for maximum airflow
  • Adult helmet with a lightweight thermoplastic shell
  • Removable cheek pads for easy cleaning
  • Quick release shield
  • DOT FMVSS N. 218 approved for safety

Pros

Comfortable and convenience

Safety certified

Durable and long-lasting materials

Cons

None

 

 

ILM Full Face Motorcycle Street Bike Helmet

 

The ILM Full Face Motorcycle Street Bike Helmet is a stylish multipurpose helmet that comes in dynamic design and multiple colors for you to choose the one that suits you. It is sleek in design and offers you lots of features that are absent in some helmets.

It is ideal for those who ride UTV more often. It meets and exceeds FMVSS-218 and DOT safety standards, which makes it safe and convenient to use for anyone. It has fantastic features, as said earlier, such as the two visors, which enhances visibility even in smoked atmospheric conditions and the one neck scarf for winter use.

The helmet is constructed in such a way that it reduces wind noise when riding. The shell is made of ABS material, which makes it sturdy and durable to handle the impact on the off chance the user falls off from the vehicle.

ILM Full Face Motorcycle Street Bike Helmet with Removable Winter Neck Scarf + 2 Visors DOT (XL, Matte Black)
1,437 Reviews
ILM Full Face Motorcycle Street Bike Helmet with Removable Winter Neck Scarf + 2 Visors DOT (XL, Matte Black)
  • 2 Visors Included: Clear + Smoked and 1 Neck Scarf for Winter Use
  • Streamlined Aerodynamic Design Reduces Wind Noise and Drag
  • Advanced and Lightweight Durable ABS Shell
  • Quick Release Clasp and Strap and Removable Inner Lining Pads
  • Meets or Exceeds FMVSS-218 and DOT Safety Standards

Pros

Lightweight and durable

Comfy and convenient

Quick-release clasp and strap

Removable comfy inner lining pads

Cons

None

 

 

X4 Women’s Motocross ATV Helmet

 

For those looking for a motocross helmet, the X4 Women’s Motocross ATV Helmet is the right choice for you. It comes in different sizes for you to choose the one that suits you. It is a helmet that boasts of excellent quality, and it is a great bargain for its price.

It is reliable to keep you safe during situations that are beyond control. The rate of head injuries in the United States keeps increasing daily, and that calls for the use of a helmet for those who want to hit the trail with their UTVs or any utility vehicle.

The features consist of a removable and washable liner, which makes it easy to keep the inner free of sweat since it doesn’t come with vent to keep sweat away from the inner part of the helmet. Also, it comes with ATV gloves and goggles.

 

Pros

Perfect for outdoor adventure

Ideal for all utility vehicle

Durable and strong

Comfy and convenient

Cons

Only for women

 

 

Arai XD4 Helmet

 

The Arai XD4 Helmet offers you all the protection needed to keep your head safe from all kinds of head injuries when riding. The helmet is DOT certified and, therefore, safe to use for cruising, street bike, and outdoor adventure.

The helmet comes in different sizes and colors for you to choose the one that suits you. It is well built with high-quality materials and boasts of fantastic design. Its appearance is captivating as it has an intermediate round oval shape.

The shell of the helmet is solid and tough to handle any impact on the ground. It has new exhaust ports with larger side cowl vents that help to get rid of sweat from the inner part of the helmet to keep it dry whenever in use.

Arai XD4 Helmet (Black Frost, Medium)
42 Reviews
Arai XD4 Helmet (Black Frost, Medium)
  • Intermediate-round oval shape
  • New exhaust ports and shell shape
  • New larger side cowl vents
  • Emergency cheek pad release system
  • Fully removable/replaceable/washable interior

Pros

Cheek pad release system

Vents for breathability

Durable and strong shell

Safety certified

Washable interior

Cons

None

 

Core Helmets MX-1 Off-Road Helmet

 

With numerous helmets in the market, you need the best that can keep you safe and give you the rest of the mind you ever desire, and one of them is the Core Helmets MX-1 Off-Road Helmet. It is a full-face helmet that covers every section of your face.

It is safety certified as it meets and exceeds the DOT FMSV218 standard, which makes it an excellent helmet for all kinds of outdoor adventure on UTVs and utility vehicles. It is well designed with good structure and top quality materials. 

The construction includes ear pockets which help to accommodate communication device, single front intake vent with six rear exhaust vents for adequate ventilation. The visor is small but can be adjusted in three positions for added visibility. 

Pros

Superior ventilation

Breathable

Padded inner

Durable and strong shell

Cons

The visor doesn’t protect against UV

 

Typhoon Adult ATV Helmet & Goggles Gear Combo

 

The Typhoon Adult ATV Helmet & Goggles Gear Combo is another type of helmet that is specially made for outdoor activities such as adventure, touring, and cruising with all-terrain vehicles. The helmet meets safety requirements, and so, it is a good bargain for you.

It comes with an aerodynamic sculpted lightweight shell that is very strong to keep your head safe. Also, the padded inner makes the helmet comfortable for you to wear for a more extended period while riding your vehicle. It is convenient and comfy for you.

The helmet boasts of three adjustable point sun visor to protect you against the UV. Also, It has a vent, which is very important at keeping the helmet clean and dry. It is an important feature that makes the helmet convenient for anyone to use.

Pros

Lightweight helmet

Strong and durable shell

Vent for breathability

Cons

None

 

O’Neal 5 Series Unisex-Adult Wingman Full Face Helmet

 

The O’Neal 5 Series Unisex-Adult Wingman Full Face Helmet is a great deal for those who are interested in an extended serving helmet for all their outdoor adventure. The design of the helmet appears to be sophisticated, yet it is a simple one that is very easy to use.

It doesn’t add weight to you as it is made of lightweight materials. The shell comes with ABS material, which can be regarded as one of the most durable materials in the market. It is almost shatterproof, and that makes it a great choice to keep your heads safe.

The inner padding of the helmet saves you from any form of inconvenience, and it ensures you are comfortable whenever you have the helmet on your head. Also, the vent plays a significant role to wick away sweat and keep fresh air in the helmet for it to stay dry.

O'Neal 5 SRS Mens Wingman Helmet (Metal/White, XX-Large)
88 Reviews
O'Neal 5 SRS Mens Wingman Helmet (Metal/White, XX-Large)
  • Polycarbonate/ABS shell construction
  • Shell weight (size large): 1380grams (50)
  • Coolmax liner- Ultra-plush removable/washable padded liner keeps you cool and dry by wicking away sweat
  • Multiple air vents help keep you cool and dry
  • Meets DOT, ECE 22-05 and AS/NZS safety standards

 

Pros

Very strong

Durable and lightweight

Vent

Cons

None

 

Core Helmets Hunter Safety Deluxe Open-Face Helmet

 

If you are not the fan of a full-face helmet, then the Core Helmets Hunter Safety Deluxe Open-Face Helmet is the right choice for you. It is a stylish helmet that comes in an alluring color that makes it attractive. Also, it is solid to keep your head safe, which is its primary purpose.

The helmet offer coverage to those who want to feel the breeze on their face when riding, but you might have to get a separate goggle to protect your eyes. The shell is made of an injection thermoplastic alloy shell, which features five snaps, which helps to accommodate a flat shield and 3-snap bubble visor.

The helmet is breathable with the help of the 2-tone brushed nylon, which makes it comfortable for you to wear for a more extended period. Lastly, it is safety certified.

Core Helmets Hunter Safety Deluxe Open-Face Helmet (Orange, Large)
326 Reviews
Core Helmets Hunter Safety Deluxe Open-Face Helmet (Orange, Large)
  • Shipping Weight:3.8 pounds, Model:Cortof8008, Item Model Number:CORVOF8008, Vehicle Service Type:street-touring-motorcycles, all-terrain-, Style:Helmet
  • Domestic Shipping:Item can be shipped within U.S., Item Weight:3 pounds, Manufacturer Part Number:CORTOF8008, Size:Large, Brand:Core Helmets
  • International Shipping:This item is not eligible for internatio, Package Dimensions:10 x 10 x 10 inches, Cover Included:Core Hunter Safety Orange Deluxe Open-Fa, Color:Safety Orange, Mpn:CORTOF8008

Pros

Comfortable and convenient to use

Hardshell for adequate protection

Breathable

Cons

Not a full-face helmet

 

LS2 Helmets Pioneer Solid Adventure Off-Road Motorcycle Helmet

 

The LS2 Helmets Pioneer Solid Adventure Off-Road Motorcycle Helmet is such a stylish and versatile helmet that has all it takes to keep the head safe when riding any terrain vehicle. The structural design and construction show it is a quality helmet.

It is made of high-quality materials, which makes it a great bargain for its price. The look is alluring, and the shell is reliable and durable, while the inner part of the helmet is loaded with padded foam that keeps you comfortable.

It has a vent to keep the whole inner part of the helmet breathable for you. It takes sweat away and keeps it dry for you to stay comfortable and convenient as long as you have the helmet on your head.

LS2 Helmets Pioneer Solid Adventure Off Road Motorcycle Helmet with Sunshield (Gunmetal, X-Large)
2 Reviews
LS2 Helmets Pioneer Solid Adventure Off Road Motorcycle Helmet with Sunshield (Gunmetal, X-Large)
  • Built-in sun screen
  • Wide eye port accommodates most major brands of goggles (goggles NOT included)
  • Emergency Release System cheek pads are contour cut from one piece of high quality foam using LS2's 3D laser technology
  • DOT approved Quick Release System chin strap for easy on and off
  • Built at our own factory means more helmet for less cash

Pros

Lightweight

Padded inner for convenience

Vent for breathability

Cons

None

Yema –  Open Face Helmet DOT Approved

Motorcycle Open Face Helmet DOT Approved - YEMA YM-627 Motorbike Moped Jet Bobber Pilot Crash Chopper 3/4 Half Helmet with Sun Visor for Adult Men Women - Matte Black,Large
505 Reviews
Motorcycle Open Face Helmet DOT Approved - YEMA YM-627 Motorbike Moped Jet Bobber Pilot Crash Chopper 3/4 Half Helmet with Sun Visor for Adult Men Women - Matte Black,Large
  • Open Face 3/4 Design Shell Offers Protection Combined with a Wide Field of Visibility Prevents That Claustrophobic Feeling.
  • Dual Visor Design :inner Retractable Smoked Visor + Outer Clear Shield.
  • Inner Lining Pads Are Fully Removable and Washable, So You Can Keep It As Fresh As New.
  • Fully Adjustable Flow-through Ventilation Gives You Control over the Elements.
  • DOT FMVSS 218 Approved for US Safety Standard, Street Legal.for Both Men and Women.

 

 

FAQ for ATV/UTV Helmet

Do you need a helmet for a UTV?

Yes, it would be best if you had a helmet for your safety.

If you are riding your UTV for whatever reason, you need to consider your safety. It should be at the top of your priority list. Falling off from the UTV with no helmet on your head can cause more damages than you can expect if you hit your head on the floor. So, the main reason for having a helmet on your head is to keep your head safe and secured.

 

Which is the best quality helmet?

You can only get to know a quality helmet by the materials used in its production. If a helmet can carry out its primary purpose very well, which is to keep your head safe, it can be referred to as a quality helmet.

 

How Should a Helmet Fit?

A helmet should fit you perfectly if you get the right size. Once you have the helmet on your head and have fixed the strap, it doesn’t slack or get too loose and not too tight. Once it sits perfectly on your head without tilting or moving to and fro on your head, you can quickly tell you’ve got the perfect snug fit.

 

Do I want an eye shield?

Yes. You need an eye shield if you get more into an adventure using your UTV. Some helmet comes with an eye shield, and you might not need to get one. However, if the one you have doesn’t have an eye shield integrated, you might have to get one to keep your face safe from unseen or flying objects.

 

Why do I want a visor on my helmet?

When riding your UTV, your vision can be impaired or affected if the sunray has a direct impact on your eye. Having a visor on your helmet will help reduce the effect the UV rays will have on your face even if you look at the sun’s direction.

 

Can I wear a bicycle helmet on a UTV/ATV?

Some people use a bicycle helmet on UTV or ATV, but that doesn’t mean they are doing the right thing. If you are using your UTV often, you should get a helmet designed to be used on UT

 

 

Conclusion

If you need a quality helmet for UTV/And and do trail riding, this post on the helmet for UTV/ATV is the perfect information for you. With the lists of the top products above and the buyer’s guide, we are sure you can never make the wrong choice.

 

 

source: https://www.wikihow.com/Measure-Helmet-Size

How To Change Oil and Filter of Your RZR XP 1000 and RZR XP 4 1000

rzr-xp-1000

When changing the oil and filter on your Polaris RZR XP 1000 or RZR XP 4 1000, always wear safety glasses and nitrile gloves. Always check and change the oil at the intervals outlined in the Periodic Maintenance Chart found in your Owner’s Manual. Always change the oil filter whenever changing oil. The PS-4 Oil Change Kit is part number 2879323. The Extreme Duty Oil Change Kit is part number 2879324.

Access the oil check dipstick through the right rear wheel well. Access the oil fill cap through the service access panel on the floor of the cargo box. The crankcase drain plug is located on the bottom of the crankcase. Access the drain plug through the access hold under the crankcase.

To change the oil and filter, do the following:

  1. Position the vehicle on a flat level surface.
  2. Place the vehicle in PARK.
  3. Start the engine. Allow it to warm up at idle for 2 to 3 minutes.
  4. Stop the engine.
  5. Remove the cargo box access panel.
  6. Remove any debris near the oil cap and remove the oil cap.
  7. Clean the area around the drain plug.
  8. Place a drain pan under the engine crankcase. Tip: Place a rag in the bottom of the drain pan to prevent the splashing of oil.
  9. Remove the drain plug with a 6mm Allen socket. Allow the oil to drain completely. Caution: Hot oil can cause burns to skin. Do not allow hot oil to contact skin.
  10. Remove the seats by pulling the lever at the back of the seat and pivoting forward to remove.
  11. With the seats out of the way, remove the oil filter access panel by pulling out and lifting straight up.
  12. Using a 2.5-inch (64mm) oil filter wrench, turn the filter (1) counter-clockwise to remove it.
  13. Using a clean dry cloth, clean the filter sealing surface on the crankcase. Make sure the old filter O-ring is completely removed.
  14. Lubricate the O-ring on the new filter with a film of fresh engine oil. Check to make sure the O-ring is in good condition.
  15. Install the new filter. Rotate it clockwise by hand until the filter gasket contacts the sealing surface, and then turn it an additional 3/4 of a turn. The oil filter for a RZR XP 1000 or RZR XP 4 1000 is part number 2540086. It is included in both oil change kits.
  16. Inspect the drain plug and sealing surfaces. Install a new sealing washer on the drain plug. The sealing washer is part number 5812232Notice: The sealing surfaces on the drain plug and crankcase should be clean and free of burrs, nicks or scratches
  17. Clean the sealing surface and reinstall the drain plug. Torque to 12 ft-lbs (16 Nm).
  18. Wipe up any residual oil on the vehicle.
  19. Fill the engine with 2.5 quarts (2.4 liters) of oil through the oil fill cap. Your Polaris Oil Change Kit comes with the proper amount of oil.
  20. Reinstall the oil fill cap.
  21. Reinstall the cargo box access panel.
  22. Start the engine and allow it to idle for 1 to 2 minutes.
  23. Stop the engine and inspect for leaks.
  24. Check the oil level and add oil as needed to bring the level to the upper mark on the dipstick.
  25. Wipe up any residual oil that may have collected on vehicle components.
  26. Reinstall the oil filter access panel.
  27. Reinstall the seats by aligning the front tabs and pushing down on the rear.
  28. Dispose of the used filter and oil properly.
  29. In addition to changing the oil, make sure to grease the propshaft and clean the spark arrestor.
  30. Grease the prop shaft through the driver’s rear wheel well and under the center console.
  31. To remove the spark arrestor, loosen the spark arrestor fastener with an 8mm socket and pull the spark arrestor out to clean.
  32. Reinstall the spark arrestor and fastener. Torque to 8 ft-lbs (11 Nm).

Programmable Service Interval
The service interval counter on the instrument cluster of your RZR is programmed to 25 hours at the factory. As hours of engine operation increase, the counter decreases. The wrench icon will flash for about 10 seconds when the counter reaches zero and each time the key is turned on thereafter until the counter is reset.

When this feature is enabled, it provides a convenient reminder to perform routine maintenance. Refer to the recommended oil change intervals.

To reset or change the service interval:

 

  1. Press and hold the MODE (4) button to enter the settings menu.
  2. Press either toggle button (5) to cycle to the “Service Hours” option. Press MODE to select.
  3. Press MODE to reset the existing value and exit or press either toggle button to change the value. Press MODE to save and exit the settings menu.

For more information, see your authorized Polaris Dealer. To find a dealer near you, use the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner’s Manual.
To view diagrams or find replacement part numbers, use the online parts catalog.

 

How To Maintain Your UTV

How to maintain your UTV

That which will determine the longevity of your UTV is how you handle it. Many people claim they got the bad Utv, whereas they fail to do the necessary to ensure the UTV last longer. This post will help you on how to maintain your UTV to improve the lifespan.

Here are essential things that you need to do to maintain your UTV and keep it working in good condition for a more extended period.

Check Your Oil Before Every Ride

This should be one of your routines. You should always check the engine oil level of your UTV before you embark on any daily activities. Failure to do that will cause more harm to your vehicle than you could think of. The vehicle engine can get damaged as a result of low oil, and that could easily be avoided by checking before use.

Check Tire Tread and Pressure

It should never be heard of you that you UTV tire got damaged because you were not aware it is leaking or needs to be inflated. You should see it as your duty to check the tires and the plug. Ensure the plugs are intact and the tires are well gauged before you decide to drive the UTV.

Use the Best Fuel

If you want to enjoy the best of your UTV, you should ensure that you use the best fuel always and never opt for any fuel. Not all fuel will get your UTV to perform very well. So, you should consider getting the best one still for the interest of your vehicle.

Change the Spark Plugs

Once you take notice that the spark plug is lacking power, it is important that you change and replaced with new ones. Never should you be too complacent and too convenient to use despite the fact your UTV is giving unpleasant sound.

Check Your Electrical Wiring

Doing aa general checkup on your UTV is important. It is similar to saying you have to do a medical checkup to ensure you remain in good health. For your UTV to remain in good health, you need to do a checkup constantly. That will help you detect if something goes wrong and need to be fixed.

Check the Coolant Often

If the coolant of your UTV is bad, you should never risk driving it as it can lead to overheating and that can eventually get the engine damaged. So you should check to know if it is working. If it is working, you are good to go, but if it is not, you should fix it before deciding you want to use it.

Conclusion

This post covers to an extent on this particular topic on how to maintain your UTV for every UTV lovers or owners out there. To improve the lifespan of your UTVs, you need to do the needful and some of the important things that you should do have been discussed in this post. The longevity of your UTV is in your hand and that all depends on how you handle it.

Best UTV Rear View Mirror – Buyer’s Guide And Expert Review 2024

Best UTV Rear View Mirror

The decision to add a rear-view mirror to your UTV is never a bad idea. You should have a crystal clear UTV rear mirror to give you a full range view of everything going around you. With this post on the best rear-view mirror for UTVs, we’ve got you covered.

It is never right for you to keep turning your head backwards while driving to view things or another vehicle coming behind you. With a rear-view mirror, you can easily see another car approaching without you having to run into each other.

UTV Rear View Mirror Buyer’s guide

Now that you have seen the collection of the top products we have selected; you should consider some factors that will help you make the right decision.

Viewing area.

The first thing you should consider is the viewing area of the mirror. The idea behind a rear mirror is to give you an undoubtful view of things behind you. So, getting a rear mirror with the right viewing area is a great decision. In other words, we mean you should consider the size as it will determine the range of activities the mirror will cover.

Installation

Will you get a rearview mirror only to have it in your UTV because you do not know how to install? No. That means you need to consider the aspect of installation when considering the type of rear mirror you want to buy. There are different types of rearview mirrors, and they have their means of installation. Check the instruction given and see to it that you can install without the assistance of anyone.

Mirror surface

The mirror face is another essential factor you should consider. It determines the quality of the images you see. There are types of rear-view mirror such as convex and non-convex. For the convex mirror, you can notice the picture may not be clear because it can distort images slightly.

But with the non-convex surface mirror, you can be assured of crystal-clear images as it shows precisely what it captures.

Anti-glare

Not all rear mirror comes with this feature, but if you care for it, you should consider choosing the one with the function. The anti-glare helps to prevent your eyes from the bright headlamps behind you. It makes it easier to drive at night, unlike the one without the glare that can temporarily blind the driver.

Shatterproof

This is another feature that you should consider. Also, not all rear mirror comes with it, but for longevity and extended life span, you must find the one with shatterproof. In cases of accidents or forceful collision with anything, the feature will keep the mirror safe and secured.

Price

A significant factor to consider. It is so important because it determines what you get. Quality products don’t come cheap, and they last longer. So, you must be willing to pay big to get quality products.

Best UTV Rear View Mirror Reviews

1. Chupacabra offroad rear view side mirror for utv

The Chupacabra Offroad Rear View Side Mirror package comes with just two mirrors that can be used on any UTVs and other utility vehicles. It should be positioned at the driver and passenger sides. It comes with a convex mirror and has adjustability settings.

The ball socket joint enhances the adjustability of the mirror, and one of the things that makes it a perfect mirror is that it comes with high impact ABS housing, which makes it durable and strong to handle all kind of rigor.

The mirror boasts of shatterproof tempered glass, which means you can use it for a very long time without any issue. It has a lifetime warranty, but that is liable to change by the manufacturer. Lastly, the mirror is built with all that is required to give you a maximum range of vision to keep you in control of your environment when driving.

Pros

Gives a wide-range view of your environment

ABS housing material

Shatterproof mirror

Rugged and stylish design

Cons

Mounting it might be challenging

Sale
Chupacabra Offroad UTV Side Mirror Kit (2 Pack) Fits 1.6'- 2' Round Roll Cage Bar, Side UTV Mirrors w/Break Away & Adjustable Design - High Impact Shatter Proof Tempered Glass (Driver/Passenger Side)
2,218 Reviews
Chupacabra Offroad UTV Side Mirror Kit (2 Pack) Fits 1.6"- 2" Round Roll Cage Bar, Side UTV Mirrors w/Break Away & Adjustable Design - High Impact Shatter Proof Tempered Glass (Driver/Passenger Side)
  • ✅ UNIVERSAL FITMENT - Fits almost all UTV's with a 1 5/8" - 2" diameter round tube roll cage - Polaris RZR mirror, Can Am X3 , Can Am Maverick , Yamaha Rhino and YXZ 1000 , Kawasaki KRX 1000 and MULE, Honda Talon and Pioneer 700 & 1000, and more. Does NOT fit Channel shaped cages ( Polaris Ranger Canam Defender Polaris General ). VEHICLE LISTINGS BELOW TO CONFIRM FITMENT. Other side by side accessories like a windshield or doors may prevent the use of these mirrors, message us for details).
  • ✅ HIGH IMPACT ABS HOUSING - offers a full range of adjustability, mirror glass is shatter proof, and tempered for safety. The breakaway glass design with the bevel edges ensures your glass will stay safe, and last for years as your Utv accessories.
  • ✅ LARGE FIELD OF VIEW - Mirror Dimensions are 4" wide by 7.2" tall, with a sleek and stylish design that looks great on all UTV's, and big enough for maximum view, even over harsh terrain. ATV mirrors make your experience safe and comfortable.
  • ✅ INCLUDES DRIVER AND PASSENGER SIDE MIRRORS - Driver and Passenger side are both fully adjustable 360 degrees to fit any round tube roll cage. The mirror glass shape is convex, which provides a wider view range. larger than most rear view UTV mirror options.
  • ✅ LIFETIME WARRANTY - Have an issue? Reach out to us! Message us and we will take care of you! Arizona based company, we ride the same trails and dunes you do! The large field of vision is one of the best of any utv mirror along with being one of the best utv accessories you can own.

 

2. BETOOLL 15″ Wide Rear View Race Mirror

The BETOOLL 15″ Wide Rear-View Race Mirror is also one of the ideal options for UTV owners. It is engineered with electroplated aluminum brackets, which prevent corrosion and scratches. It has good housing, which makes it strong to resist wind hitting and pump.

The convex mirror gives you a wide range view of your environment, which makes you informed of all that goes on around you. It is assured of being it its place even when your vehicle encounter bump as its housing of the lens is tightened to prevent movement or shaking.

The right positioning is hard to maintain without the assistance of the four small metal gaskets. The installation of the mirror is easier to do with all the necessary accessories needed for a secure mount included. The glass is clean, doesn’t gives distorted images, and it helps to prevent blind posts.

Pros

Gives ultra-clear images

Eliminate distorted images

Very easy to install

Ideal for many vehicles with its universal mounting system

Cons

It doesn’t come with an installation guide

15' Wide Rear View Race Mirror Convex Mirror with 1.75' Clamp for UTV Compatible with Polaris RZR800 1000 XP900 1000 S
716 Reviews
15" Wide Rear View Race Mirror Convex Mirror with 1.75" Clamp for UTV Compatible with Polaris RZR800 1000 XP900 1000 S
  • Widen Your View:Wide angle 15"x2.6" Convex shape for maximum rear view without being cumbersome
  • Fit Vehicle:Under the RZR 800 XP 900 900 / 900S 2015 - 2017 / & XP 1000 / Turbo 2014 - 2017 visor without removal or trimming
  • Four Small Metal Gaskets: to hold the mirror tightenly , stop the mirror sliding from the mounting brackets
  • Easy Installation: Fit for 1.75" diameter bar. Dual 10mm Aluminum brackets with 3mm hex bolts for a reliable, secure mount.
  • More Safety : Real glass lens of the mirror, give you non-distorted and ultra clear images, helping to reduce blind spots and ensure your driving safety

3. ISSYZONE High-Definition Mirror

Every rider needs to be fully aware of all that goes on around him or her, and that is what ISSYAUTO High-Definition Mirror is designed to do. It is a rear mirror that fits most UTVs and utility vehicles. With its adjustable viewing angle, you can use it as your side mirror or front mirror.

The mirror gives you more viewing range for you to prevent blind spots, which is needed for safe driving. Luckily for UTVs owner, the mirror comes with several size tube adapters, which makes it very easy for anyone to mount and install.

With the 360-degree rotation, it is very easy to adjust to any angle or direction for a wide-range view of your environment. The glass is clear and eliminates all chances for distorted images, which makes it safe for driving any time of the day.

Pros

Give wide viewing range with the 360-degree rotation

Very easy to install and mounting with the help of its multiple mounting brackets

Clear images for safe driving

Cons

It has no significant setback

2022 UTV Mirror, ISSYAUTO Clear Convex Mirror with ShatterProof Tempered Glass and 1.5'-2' Mount Compatible with 2021 Polaris RZR PRO XP, Commander and Maverick X3, Viking, Rhino, Pioneer, Kubota RTV
364 Reviews
2022 UTV Mirror, ISSYAUTO Clear Convex Mirror with ShatterProof Tempered Glass and 1.5"-2" Mount Compatible with 2021 Polaris RZR PRO XP, Commander and Maverick X3, Viking, Rhino, Pioneer, Kubota RTV
  • 【MULTI-FUNCTIONAL UTV MIRROR】 - This rear view mirror is easy to adjust viewing angle and fits as Front and Side Mirror. If you get the driver and passenger along with a Universal Rear View Mirror, you can drive your UTV safely and make sure your buddies don't fall far behind.
  • 【CLEAR CONVEX MIRROR】 - Real glass lens of the Clear UTV Mirror, give you non-distorted and ultra clear images, helping to reduce blind spots and ensure your driving safety.
  • 【NEWEST PIVOT BALL GLASS】 - Non-slip ball joint, 360-degree rotation to adjust your view angle. This UTV mirror can gives good angle of rear view you could see everything that was coming up, easy to adjust and easy to install.
  • 【WIDE APPLICATION】 - This utv or rtv rear/side view mirror comes with several size tube adapters(3 multiple mounting brackets) and very stable fit most 1.375 inch- 2 inch roll bar. Comes with anti-slip rubber pad, increase friction for installation.
  • 【Convex Design Mirror】 - This UTV center mirror provides more viewing range for you to easily to prevent blind spots and some traffic accidents, which can improve your safety greatly.

4. Moveland Convex Rear View Mirror 

Riding safely is one of the most important things every rider desire, and one of the ways to experience that is to be aware of all that is going on around you with the help of a quality side or rearview mirror. One of the bunches in the market to consider is this rearview mirror.

It is designed for race cars, and so it is built with strong materials that can handle the test of time. It can withstand bump effects and effects from rough driving as you try to move around obstacles. It comes with tough housing that makes it tight to stand against wind and shock.

The mounting bracket is solid enough to reduce vibration when driving, and installing it on any vehicle is very easy to do for anyone. It has a simple and compact design, but it works very well all day. The image is very clear and accurate.

Pros

Clean, clear and accurate images

Anti-scratch and shatterproof mirror

Makes driving easier for all

Clear and crystal images

Cons

None

Sale
[NEWEST] 15' Wide Angle UTV Rear View Race Mirror with Anti-Scratch Shatterproof Glass - 1.75-inch Clamps, Moveland Convex Mirror Compatible with Polaris RZR 800 1000 S 900 XP 1000 and More
204 Reviews
[NEWEST] 15" Wide Angle UTV Rear View Race Mirror with Anti-Scratch Shatterproof Glass - 1.75-inch Clamps, Moveland Convex Mirror Compatible with Polaris RZR 800 1000 S 900 XP 1000 and More
  • UNLIMITED OFF-ROAD DRIVING:The housing of the lens is tight enough to prevent from wind and shocks when driving in rough roads or grassland, anti-scratch and shatter-proof (Avoid cheap versions known to cause falling off)
  • EASY & QUICK INSTALLATION:The mounting brackets adjust from 1.68" to 1.75" which can be simply tightened to most roll bars of visor without removal or trimming
  • STURDY MOUNTING BRACKETS: Made of high strength aluminum alloy material and rubber mounted to reduce vibration
  • UNIQUE DESIGN: Engineered for side by sides and UTV's for safety and function
  • WIDEN YOUR VISION: Right size not to be in the way of forward vision but allow great rear view span

5. ATV Tek Stable Clearview UTV Center Mirror

The ATV Tek (UTVMIRCTR) Stable Clearview UTV Center Mirror offers crystal clear view of your environment, which makes it a perfect deal for all UTVs and utility vehicle owners. It comes with just one piece of mirror and simple design that ensures you can easily install or mount on your vehicle roll cages or anywhere possible.

It has rubberized seal and ball mount, which help to reduce vibration, thereby eliminating any chance for blur images. The convex mirror gives the brightest view of the need for a safe driving experience. It comes with all that you need to install.

Also, the mirror comes with quick and easy micro-adjust, which gives the rider a perfect mirror orientation to position the mirror to the best place. Moreover, it is not expensive, which makes it a great deal for those who are in need of a quality rearview mirror.

Pros

Vibration reduction mount set

Offers crystal clear view

Reliable for safe driving

Picks objects from a far distance

Cons

It has no significant setback

Sale
ATV Tek (UTVMIRCTR) Stable Clearview UTV Center Mirror
324 Reviews
ATV Tek (UTVMIRCTR) Stable Clearview UTV Center Mirror
  • VIBRATION REDUCTION MOUNT Tool free adjustment, great for different riders; ATV-Tek Clearview UTV Tubular Cage Center mount mirror.
  • CUSTOM FIT Clearview UTV center is universal to fit tubular roll cages from 1 - 2.5" diameter
  • UNIVERSAL FIT Low profile mount compatible with most windshields, fits many UTV models
  • TECHNOLOGY Rubberized seal and ball mount to reduce vibration Lightly convex to increase field of view
  • ATV Tek, Quality ATV and UTV accessories for your best experiences on or off the road.

The BETOOLL Upgraded Adjustable Pair UTV Side Mirror comes with two pairs of mirrors, one for the passenger side and the other for the driver. It gives the driver a wide-range view of things around from both sides. It is well built with high-quality materials that can stand the test of time. 

The high impact ABS housing is the perfect home for the mirror glass as it helps to keep the shatterproof tempered glass safe. The mirror fits almost all UTVs and utility vehicles, and it has one of the effortless means of installation. 

Also, it has a ball socket joint for unlimited viewing angles. With the mirror, you are assured of crystal-clear view of your environment, stabilized images that are needed for safe driving. It totally eliminates your chance of running into another vehicle or motorcycle beside you. 

Pros

Fit almost all UTVs

Wide range view 

Image stabilization

Clear and crystal images

Unlimited viewing angles design

Cons

None

7. OxGord Rear View Center Mirror

If you do not have the luxury of money to spend on the rearview mirror and you are a big fan of a quality mirror, then the OxGord Rear View Mirror UTV Accessories is the best choice for you. It is built with high impact ABS housing, and it has universal roll cage bar mounts that are applicable for most UTVs.

This is just a single design mirror with shatterproof glass that you can use for a longer period. It fits most UTVs, and the package includes clamp and hardware that makes the installation effortless for all. The image you get from the mirror is clear and clean, which totally eliminates any form of guessing.

It has a ball socket joint that ensures you can move the mirror to any angle that suits you. This mirror offers you all that you can ever get from the expensive and quality ones in the market, and it comes cheap and affordable.

Pros

Shatter-resistant glass

Wide viewing area

ABS plastic casing

Clamp and hardware installation included

Easy to install

Cons

None at the moment

Rear View Mirror UTV Accessories - Mirrors Best for Wide Angle Center or Side-by-Side Off Road Clear-View - High Impact ABS Housing & Universal Roll Cage Bar Mounts with Shatter-Proof Tempered Glass
815 Reviews
Rear View Mirror UTV Accessories - Mirrors Best for Wide Angle Center or Side-by-Side Off Road Clear-View - High Impact ABS Housing & Universal Roll Cage Bar Mounts with Shatter-Proof Tempered Glass
  • CHECK FIRST: Fits almost all UTV’s available -Please Refer to Amazon's Parts Finder Tool to Insure Fitment -Select your Vehicle's Year, Make, and Model to make sure it fits
  • UNLIMITED VIEWING ANGLES: Convex mirror with a wide viewing range and image stabilization -Uses a breakaway feature and ball socket joint so you can move the UTV rearview mirror to view any angle
  • DURABLE: Engineered with high impact ABS housing and shatter-proof tempered glass -Provides large non-distorted and ultra-clear panoramic images for a safer driving experience without blind spots
  • EASY TO INSTALL: Our UTV rearview mirror includes clamp and installation hardware to fit most 1.375 inch-2 inch tubing -Great for various roll bar and roll cage diameters
  • GUARANTEE: Includes a one (1) year limited warranty

8.  Valchoos Rear View Race Mirror For Polaris RZR800 XP900 XP1000

The Valchoose Universal 1.75″ Clamp ATV will be a great addition to your UTVs. It is perfect for safe riding, and that is why all rider needs it. The mounting hardware of the rearview monitor comes with a universal style, which makes it perfect for all UTVs and utility vehicles.

Also, it is easy to adjust to any angle for a wide range of views of the environment. It allows you to virtually see all that is going on behind you clearly, thereby eliminating all chance of things getting on you unaware.

The convex design mirror has a real glass lens, which makes it gives a clear image even from a far distance. The mirror prevents blind spots. Furthermore, the ABS housing frame of the mirror makes it durable for long term use.

Pros

ABS housing frame

Avoid blind spots

Perfect for all UTVs

Gives clear images

Cons

None

9. ISSYZONE High-Definition Mirror with ShatterProof Tempered Glass

The issyauto RZR Rear View Center Mirror is a great deal for anyone in need of a quality rearview mirror. It comes very handily and safe to use on any vehicle. It allows you to keep yourself informed of all that is going on behind you.

It comes with three adjustable mounting methods with adjustable angles for a wide range view. With the newly added clamp, you can easily install the UTV mirror on your vehicle. The mirror gives you a clear view of things, thereby reducing blind spots and ensure you drive safely.

The ABS housing frame keeps the mirror in place even if you have to find your way around obstacles. It is strong to prevent the glass from the shock, which could break the glass.

Pros

Shatterproof

Lightweight and durable

Improves driving

Cons

It has no significant setback

RZR Rear View Center Mirror, ISSYAUTO HD UTV Mirror with ShatterProof Tempered Glass and 1.75' Clamp Compatible with Polaris RZR 800 1000 S 900 XP 1000, Kawasaki, Arctic Cat Wildcat
148 Reviews
RZR Rear View Center Mirror, ISSYAUTO HD UTV Mirror with ShatterProof Tempered Glass and 1.75" Clamp Compatible with Polaris RZR 800 1000 S 900 XP 1000, Kawasaki, Arctic Cat Wildcat
  • 【3 ADJUSTMENT METHODS】 - We have designed three holes in the bracket which are allow you keep the rzr mirror horizontal at all times. The brackets provide a steady mounting and 3 adjustment methods for the rzr rear view mirror, can be adjusted to the best angle of backside viewing.
  • 【NEW VERSION CLAMP】 - You just need to remove only one screw when you remove and install the utv mirror. Our new version clamp have a toothed design which allows it holds the roll bar tightly, better prevent wind and shock when driving in rough roads or racing.
  • 【CLEAR CONVEX MIRROR】 - Real glass lens of the clear UTV Mirror, give you non-distorted and ultra clear images, helping to reduce blind spots and ensure your driving safety. Warm tips: This rzr mirror only compatible with 1.75" roll bar. And it will not compatible with roof.
  • 【SHATTER RESISTANT GLASS】 - The back of our rzr mirror have explosion-proof membrane, which prevents broken glass from hurting people. High impact ABS housing frame holds the mirror tightly, better prevent wind and shock when driving in rough roads or racing.
  • 【WIDEN YOUR VISION】 - 15" length of convex rear view mirror, provides a super wide field of vision for you to easily to prevent blind spots and some traffic accidents, which can improve your safety greatly.

10. Chupacabra Offroad 15″ Rear View Mirror 

Driving safely can never be achievable without a rearview camera. You have the Chupacabra Offroad 15″ Rear View Mirror to offer you all that you need to have a smooth and safe drive. It has a simple design that makes it easier to assemble and pull down without hassles.

This is a resourceful mirror with a shatterproof and explosion-proof membrane, which prevents the glass from breaking in cases whereby you get involved in an accident while riding. The high ABS housing frame holds the mirror tightly against shock and wind.

The installation on any vehicle is simple with the use of the brackets that has three mounting styles. Also, the housing case and other materials used in the construction of the mirror are resistant to corrosion.

Pros

Anti-friction and corrosion resistant

Easy to assemble and disassemble

ABS housing frame

Lightweight and durable

Cons

None

Chupacabra Offroad 15' Rear View Mirror - RZR 800 900 1000 Turbo 1.75' Mount
414 Reviews
Chupacabra Offroad 15" Rear View Mirror - RZR 800 900 1000 Turbo 1.75" Mount
  • [HIGH-DEFINITION] - Real glass lens of the high-definition UTV mirror, gives you non-distorted and ultra-clear images, helping to reduce blind spots and ensure your driving safety.
  • [WIDEN YOUR VISION] - 15" length of convex rearview mirror provides a super wide field of vision for you to easily see and prevent blind spots and traffic accidents.
  • [3 ADJUSTMENT METHODS] - The brackets provide a steady mounting with 3 adjustment methods for the rearview mirror. Anti-friction and corrosion-resistant, and can be adjusted to the best angle of backside viewing.
  • [SHATTER RESISTANT GLASS] - The back of these mirrors have an explosion-proof membrane, which prevents broken glass from causing an injury. High-impact ABS housing frame holds the mirror tightly, prevent wind and shock when driving in rough roads or racing.
  • [EASY INSTALLATION] - The butterfly clasp design makes the mirror easier to disassemble and install. Compatible with 2014-2020 Polaris RZR XP 1000, Turbo, Turbo S, 900, 800, & 570 models/Arctic Cat Wildcat X 1000, Sport 700.

 

Conclusion

Choosing the best Rear View mirror for UTVs is more comfortable with the guide we have given, and you can always make the right call with the sets of the products we have chosen in this post.

Best UTV Gun Rack – Buyer’s Guide And Expert Review 2024

Hunting is fun only when you have all your gears available, and the only challenge has been the means of conveying gears such as a gun to the hunting site. Some hunters make use of their backpack while some who have UTV opt for a gun rack. Using the best UTV gun rack to convey your hunting gear makes life easier for you.

Balancing your gun on a rack that is fastened on the UTV eliminates all worries of how to get your gun to your hunting site. Moving firearms from one place to another requires you to have them stored in a secured and safe place, and one among many others you can trust is a gun rack.

Our 9 Top UTV Gun Rack Reviews

 

1. Kolpin UTV Gun Rack – 20073

 

Kolpin UTV gun rack comes with a pleasing design you’ll fall in love with at first sight. What about its build quality? This rack is made of excellent materials and very easy to mount.

The rack features a solid and stiff rubber that holds the gun snugly. With this, unwanted movements and vibrations are restricted, thereby ensuring safety. Plus, the rubber helps to prevent scratches. This piece allows you to adjust the height from 27 ½ to 35 ½ and at any angle up to 45 degrees for a quick grab when you urgently need your gun.

What’s more, this rack features two spots on either side to mount weapons. You can even mount a rifle and a crossbow on either side if you want to.

Kolpin UTV Gun Rack - 20073,Black
323 Reviews
Kolpin UTV Gun Rack - 20073,Black
  • Vertical in-cab gun rack mounts to UTV Floor
  • Constructed of heavy-duty over-molded rubber to securely hold the stock of your firearm and over-molded v-blocks with tough rubber straps to provide firearm and barrel support. (Firearms not included)
  • Standard mount fits flat UTV floors. Gun Rack Mount adapter riser (20074) required for Polaris and Yamaha utility vehicles with center transmission hump.
  • Adjustable height from 27-1/2" to 35-1/2"; fully adjustable, angling up to 45 degree in either direction
  • Base Dimensions: 5-1/4" w x 6" front to back

Pros

  •         1-year warranty.
  •         Heavy-duty rubber used.
  •         Fully adjustable.
  •         Fits flat UTV floors (standard mount).

Cons

  •         Not suitable for vehicles like Polaris Ranger.
  •         A little heavy at above 8 pounds

 

2. QuadGear UTV Double Gun Carrier

 

The second on our list is the QuadGear UTV Double Gun Carrier. It can securely hold up two riffles at a time. Besides, this rack can fit most 2015 UTVs (Polaris, Yamaha, and Kawasaki UTVs) roll cages and even older models. It comes with a simple design that allows you to access your riffle in no time.

The QuadGear rack is guaranteed to serve effectively for the next two years. That invariably means that it’s a durable piece to consider. This rack is made of heavy-duty ProtekX6 fabric with water-resistant support and external coating for protection against harsh weather and abrasion.

This rack features three large gear pockets for additional shells or other things. Plus, its heavy-duty strap holds the rack tightly to the back of UTV roll cages. You’ll find a quick-release button that helps to pull out of riffles as fast as possible.

Classic Accessories QuadGear Black UTV Double Gun Carrier - 18-129-010401-00
161 Reviews
Classic Accessories QuadGear Black UTV Double Gun Carrier - 18-129-010401-00
  • Fits most UTV Roll Cages (2015 models and older), Gun Carrier measures 53"W x 4"D x 17"H
  • Great fit for Polaris, Yamaha and Kawasaki UTVs (2015 models and older)
  • Two year limited warranty
  • Heavy duty ProtekX6 fabric with water resistant backing and exterior coating for maximum weather and abrasion protection
  • One rifle or shotgun fits in each side

Pros

  •         Two years limited warranty
  •         Hold riffles securely
  •         Surface is backed with water-resistant material
  •         Features a quick-release buckle

Cons

  •         Not for overnight storage

 

3. Kolpin Gun Boot 6.0 – Impact – 20025

 

The Kolpin Gun Boot 6.0 is yet another brilliant piece to consider. Its hinged hatchback design has been an inspiration to many gun racks. Every part of this rack guarantees your gun’s safety and easy accessibility to your gun. It’s a versatile rack that can hold just any firearm up to 51 inches in length. Plus, you’ll get additional space also to keep your pistol grips and small bi-pods on this rack.

This rack comes in an ergonomic design that makes it compatible with all Kolpin mounting brackets (20035, 20350, 20351, 20032, 20033, 20005, 20006, 20200 and 20029). Besides, it can fit any of your UTVs due to its utility gear rail system. The safety of your firearms is guaranteed with removable foam Impact liner which comes within the hard case

This rack is structurally designed to allow both left and right-hand bolt action shotguns and rifles, abundant space for 50mm scopes or rifles with slings attached.

Kolpin Gun Boot 6.0 - Impact - 20025, Black
206 Reviews
Kolpin Gun Boot 6.0 - Impact - 20025, Black
  • Fits firearms up to 51" in total length; Extra room for pistol grips & small bi-pods; Hinged hatchback with snap close cover and locking capability;
  • Includes a removable foam Impact liner that provides superior interior protection within the hard case; ergonomically designed handle and molded attachment points for a sling.
  • Anatomically designed to accommodate left and right hand bolt action rifles and shotguns, ample room for 50mm scopes or rifles with slings attached.
  • Compatible with Kolpin mounting brackets (20035, 20350, 20351, 20032, 20033, 20005, 20006, 20200 and 20029); Able to fit on your UTV with our Utility Gear Rail System.
  • Hinged hatchback with snap close cover;

Pros

  •         Can hold up to 51 inches firearm
  •         Features a utility gear railing system
  •         It guarantees firearm safety
  •         Features an extra space to keep pistol grips and small bi-pods

Cons

  •         None

 

4. Kolpin Rhino Grip – Double – 21505

 

Are you in search of some kind of grip that can keep your gun secured and as well safe? You might want to consider the Kolpin Rhino Grip – Double – 21505 as its vise-like grip can hold your gun in place. It is a multipurpose rack that offers users the most convenient way to store their gears while then ride their ATV. And since it comes as a pair, then two guns can be held tightly at a time.

The fact that this rack is made from heavy-duty materials assures us that it will be able to stand the test of time. This rack can not only hold up guns, but other configurations of gear can also as well be mounted on it, thanks to its flexibility. Knowing that this rack comes with a carrying capacity is only 15 pounds, be sure not to overload the rack.

Kolpin Rhino Grip - Double - 21505
876 Reviews
Kolpin Rhino Grip - Double - 21505
  • Features off-set mounting to maximize rack space; Sold as a pair
  • Durable and flexible rubber grips designed to carry light-weight items. (Up to 15lbs.); Rubber Securing straps
  • Designed to fit trucks, SUVs, ATVs, UTVs, RVs, trailers, pretty much anything.
  • Drilling required to mount on some composite racks; Sold as a pair; Mount to any tubular or square bar from 5/8"-1-1/4" in diameter OR to any flat drillable surface;
  • Available in 4 styles: Single (21500), Double (21505), Window Suction Cup (21520) and Window/Wall Mount Adhesive (21525)

Pros

  •         Multi-purpose gun rack
  •         Made of heavy-duty material
  •         It’s flexible

Cons

  •         None

 

5. QuickDraw Overhead UTV Gun Rack

 

If you are looking the best way to keep your guns close your reach, then you might want to consider the QuickDraw Overhead UTV Gun Rack. Ready for action! Besides, for utility vehicles with covers at the top, your guns stay wholly secured from the elements.

The Quick Draw comes with very soft rubber gun clips, which provide quick access and safe transport. If there’s one thing we love about this rack, it’s the fact that installation takes just minutes without any need to drill or bolt, thanks to its unique mounting system.

This rack is lightweight and portable, weighing just 5 pounds. QD855OGR fits popular brands of UTVs, including John Deer Gator, Club Car XRT 1550, Kymco, Razor, Bulldog, Vanish, Titan, Kubota RTV, Polaris Ranger, Kawasaki Mule, Kubota RTV, Honda Big Red and other UTVs.

Great Day Quick-Draw Overhead Gun Rack - For UTVs With Roll Bar Depth of 23-28in - Black Powder-Coated Finish - 2 Gun Model, QD850-OGR
97 Reviews
Great Day Quick-Draw Overhead Gun Rack - For UTVs With Roll Bar Depth of 23-28in - Black Powder-Coated Finish - 2 Gun Model, QD850-OGR
  • Holds 2 guns overhead with easy access
  • Protects guns from weather
  • Easy to mount, no drilling or bolting
  • Super-soft rubber gun clips provide easy access and a secure transport

Pros

  •         Lightweight and portable
  •         Provides for easy access
  •         Installation takes no time

Cons

  •         None

 

6. Kolpin Ratcheting Rhino Grip – 21540

 

The Kolpin Ratcheting Rhino Grip is no doubt one of the most durable gun rack we have in the guide. It can accommodate heavy firearms up to 15 pounds. Its one-button release option makes it user-friendly. In just a click, you have your gun, and off you go down for hunting.

It comes with an inlaid rubber surface that makes it easy to store different weapons and tools at a time. Weapons you can mount on it includes shovels, firearms, fishing rods, crossbows, poles, etc.

This rack is not only useful for deer hunting purposes, but you can as well take it along for your fishing. What’s more, the checkered grip is made of nylon rubber, which helps prevent scratches. The maximum diameter of weapon this rack can accommodate is 4 inches.

Sale
Kolpin Ratcheting Rhino Grip - 21540 (Pair), Black
390 Reviews
Kolpin Ratcheting Rhino Grip - 21540 (Pair), Black
  • Up to 15lbs. of carrying strength for your medium-weight gear.Fit Type: Universal
  • Heavy-duty nylon with inlaid rubber grip texture
  • Quick-release button for one-handed easy access to gear
  • Indexed ratcheting grip arm secures items from 1”-4” in diameter
  • Heavy-duty base system mounts to tubular or square bars from 5/8"-2" in diameter or to flat, drillable surface

Pros

  •         1-year warranty.
  •         No movement.
  •         Extremely secure.
  •         The nylon grip is sturdy.

Cons

  •         No 360 movement.
  •         May require a bit of tweaking.

 

7. Big Sky SBR-2G Gun Rack 2-Gun Sky Bar

 

There are a lot of reasons this product became users’ favorites. First is that the installation process does not take much time, and storage is no issue, especially for vehicles. Another is that it features a perfect vehicle mount, which allows users to travel with their guns quickly.

Furthermore, anyone can easily get along with this rack. You can store it just whichever way you want it and can be taken take anywhere. This rack comes with a telescopic square bar to give perfection. Besides, its adjustable bracket allows for easy mounting.

Finally, you have no cause to worry when it comes to sturdiness. The gun rack is made with quality and durable nylon. And the fact that this rack provides a firm fit is one big reason users like it.

Pros

  •         Made with heavy-duty material
  •         Great fit for almost all weapons
  •         Has a telescopic square bar
  •         Versatile for different vehicles
  •         Easy installation

Cons

  •         Does not go with some truck models
  •         Has issues with the chrome of the strap loops

 

8. Kolpin Rhino Xl Double 21515

 

If there’s one thing you’ll love about this rack, that must be its portability. This is a double-multifunctional rack, that is to say, that you can mount two things at a time. Its design is such that it will suit your RVs, UTVs, and ATVs as well!

It comes with a durable grip, which makes the rack quite safe for your guns. What’s more, vibration is reduced to the barest minimum with its rubberized grip. This way, you can enjoy your off-road ride without any unpleasant sounds.

This rack features an additional offset mounting, which helps save up more space for your weapons. What’s important is that you get the bar-diameter in the range of 5/8 inches and 1.25 inches. This makes your rack rather handy. What’s more, It comes in a lightweight design but can only accommodate any weapon less than 15 pounds.

Sale
Kolpin Rhino XL - Double - 21515 (Pair)
915 Reviews
Kolpin Rhino XL - Double - 21515 (Pair)
  • Our Rhino Grip XL series are our best-selling grips; the XL Doubles configuration has increased carrying strength of up to 20lbs. for your medium-weight gear; Feature a 360-degree rotating and tool-free adjustable multi-angle design; Sold as a pair

Pros

  •         Easy to mount
  •         Holds multiple rifles
  •         Cheap

Cons

  •         Can only be used with lightweight guns

 

9. ATV/UTV Tek VFG1 V-Grip Single Rider Gun/Bow/Tool Rack

 

The ATV Tek VFG1 is an improvement of the previous VFGH version. It can hold a single weapon but comes with a variable fit. Driving through bumpy roads with this gun rack won’t be an issue as it reduces shocks, vibration, and movements of the gun. Thanks to its Air Tek Suspension.

One thing we love about this rack is that it’ll hold up your weapons firmly and will protect them from scratches and damage. The fact that you can rotate this rack up to 360 degrees makes it easier to access the gun.

What’s more, it comes with a unique bow limb slot, which allows you to mount even a bow easily. Now you’ll have to choose whether you’ll hang a gun or any other tools that fit on this gun rack.

Sale
ATV TEK, VFG1, V-Grip Mounting Rack for Gun, Bow, Tools, Utilities - Single Rider
155 Reviews
ATV TEK, VFG1, V-Grip Mounting Rack for Gun, Bow, Tools, Utilities - Single Rider
  • UNIVERSAL FIT - The SmartBlock mounting technology fits all tubular and plastic ATV/4 wheeler racks from 0.5 inch to 1.25 inches. A true custom fit for your gun, soft gun case, bow, handled tool, or any other item using the highly engineered, gun, bow, and utility slots in the V-Grip line of products.
  • EASY ADJUSTMENT - This V-Grip Rack features a new and improved tubular and composite rack mounting system that offers effortless installation, unmatched versatility, and a rock solid mounting base. Finger-adjustable knobs allow quick tool-free adjustments when you're on trail.
  • 15 percent larger forks, spline allows fork to rotate 360 degrees
  • SECURED GRIP - The V-Grip design isolates recoil and vibration. This protects your valuable gear while heading out in the field.
  • PREMIUM QUALITY - Made of durable, corrosion-resistant materials, this two-limb rack offers long-lasting quality that will endure lots of use and reuse.

Pros

  •         Two limbs.
  •         Fits all tubular and plastic bars on four-wheelers from 0.5 to 1.25 inches.
  •         15% larger forks than most gun rack mounts.
  •         Adjustable from side to side.

Cons

  •         Holds a single weapon only.
  •         The straps are of poor quality.

 

 

 

Best buyer’s guide on choosing the right gun rack

There are some essential things that you need to consider when it comes to getting a gun rack that can fit perfectly on your UTV. We have made the list of the most important ones to share with you if you are in the search for any of the best gun rack for UTVs.

Design

The first you need to consider is the design of the gun rack. Some gun rack comes with single gun space while some come with dual. You need to look into the numbers of firearm you will be conveying to your hunting site before choosing any gun rack.

If you have more than one gun, it is essential that you go for the gun rack with the dual application. One gun will be perfect with a single gun rack space.

Style

There are different types of a gun rack in the market. Gun racks are different from each other in styles, and you need to be familiar with this. Some have a versatile style in which it can accommodate all kind of firearms such as rifles, poles, and bows.

Some will only accept a particular firearm, and that is why you need to do your findings on the exact gun rack you want to get. Read the specification to ensure you have the right information before buying any gun rack.

Less movement

The next thing you need to look into is the movement of the gun on the rack. How then will you know this since you have not purchased the rack? You need to look at the fastening material on the rack and ensure it can hold the gun firmly in place.

If the gun is not firm on the rack, it will likely hit your UTV and lead to scratches which you wouldn’t want to happen. Due to this, you need a rack that will give less movement to ensure you don’t have to fall back to fixing damages.

Price

Another factor you should consider is the price of the gun rack. There are different types in the market from quality brands. You need to do your research and choose the one that is compatible with your UTV, but you must be ready to spend big because quality products don’t come cheap.

 

Conclusion

Hope you lived out chosen gun racks.  You comments are welcome. 🙂